내 장바구니

배송 / 픽업은 모든 주문에 항상 포함되어 있습니다.
장바구니가 비어 있습니다
시험을 추가하여 시작하세요
시험 둘러보기
Cosmetic Testing Lab
CPSR SDS
패키지 보기

FDA Color Additives vs EU CI Numbers: What Changes on Export

11월 21, 2026  ·  읽는 데 7분

FDA Color Additives vs EU CI Numbers: What Changes on Export

If you export a US cosmetic, the shade list needs a check of its own. This guide to FDA color additives vs EU CI numbers explains how the two systems approve colours, what changes on your formula and label, and how to avoid surprises when a shade that is fine in the US is limited or missing in Europe. It is general information, not legal advice.

목차
  1. The short answer
  2. How the FDA regulates colour additives
  3. How the EU regulates colourants
  4. Mapping US names to CI numbers
  5. Batch certification versus EU purity checks
  6. Special cases to flag early
  7. What changes on the label
  8. Example: reading an Annex IV entry
  9. Stability and compatibility of colours
  10. A practical export checklist for colours
  11. Frequently asked questions
  12. Key takeaways

The short answer

In the US, colour additives need FDA approval for their intended use and many are batch-certified by the FDA; in the EU, colourants must be listed in Annex IV of Regulation (EC) No 1223/2009, are identified by Colour Index (CI) numbers, and carry conditions on the type of product or area of use. There is no EU batch certification. Instead, the Responsible Person and the safety assessor must be satisfied that each colourant is listed, used within its conditions and sufficiently pure, which is documented in the CPSR. Check every shade before you reprint labels or ship.

How the FDA regulates colour additives

In the US, a colour additive may not be used in a cosmetic unless the FDA has approved it for that intended use. The approved colours fall into two groups. Certifiable colours (listed in 21 CFR Parts 74 and 82) have names such as FD&C Blue No. 1, D&C Red No. 7 or Ext. D&C Violet No. 2. Each batch must be certified by the FDA before it is used. Exempt colours (21 CFR Part 73) include many mineral and natural colours, such as iron oxides, titanium dioxide, mica and carmine, and do not need batch certification. Both groups come with identity, purity and use limits, for example colours permitted for external use only or not for use near the eye.

The FDA also notes that a CI or E number does not indicate FDA certification. A shade can have a CI number and still not be allowed for your product in the US.

함께 읽어보세요 화장품 나노물질 규정: 규칙과 통보

How the EU regulates colourants

Annex IV of Regulation (EC) No 1223/2009 is the positive list of colourants allowed in cosmetics. Each entry gives the CI number, the colour name and a field of application. Typical conditions are “all cosmetic products”, “not to be used in eye products” or “not to be used in products applied on mucous membranes”, and some entries set a maximum concentration or require a specific purity or label wording. Colourants intended only to colour hair are handled under a different part of the regulation (the hair dye rules), not Annex IV.

The result: a US shade can be fully legal at home and still be limited, restricted to certain product types, or absent from the EU list.

Table comparing FDA colour additive rules and EU Annex IV colourant rules for approval, naming, batch control, conditions, labels and proof.

Mapping US names to CI numbers

Many FDA certifiable colours have a matching CI number, but the name and the legal status must both be checked. Use this process:

  1. Take each colourant from your formula, with the supplier’s INCI name and CI number.
  2. Find the CI number in Annex IV, for example in the Commission’s CosIng database or the consolidated regulation.
  3. Read the conditions: product type, area of use, maximum concentration, label text.
  4. Compare with your product. A lipstick, a mascara and a body wash may meet very different conditions with the same shade.
  5. Note lakes and pigments. A lake has its own CI number, often with a suffix after the colon, and must be listed too.

Ask your supplier for a specification stating the CI number, the purity and the compliance with the EU list. A US-only certificate is not enough for the safety file.

Batch certification versus EU purity checks

US batch certification does not travel to the EU. The EU does not certify batches, and the Responsible Person remains responsible for ensuring that the colourants in each batch meet the requirements. In practice, this means supplier specifications, certificates of analysis and, where the formula calls for it, the impurity review that the safety assessor performs. Heavy metals and other impurities in pigments need particular attention.

함께 읽어보세요 화장품의 CMR 물질 안내: 무엇이 금지됩니까

Special cases to flag early

  • Titanium dioxide (CI 77891). It remains listed for cosmetics, but its classification for inhalation in powder form has led to extra rules and scrutiny. Check the current text for loose powders and sprays.
  • Nanomaterials. Nano-form pigments need separate notification and labelling in the EU.
  • Eye-area products. Some colourants are allowed in the US eye area only if specifically approved, and the EU has its own conditions. Check both.
  • Natural colours. Plant extracts such as annatto or beta-carotene may be exempt in the US and be listed by CI numbers in the EU, but only the entries on Annex IV count. A natural origin does not exempt a colourant from the list.
  • Hair colours. These follow different rules in both systems and need their own review.

What changes on the label

The EU ingredient list shows colourants by CI number, using the CI prefix, and not by FD&C or D&C names. Decorative products sold in several shades may list all colourants of the range with “may contain” (or +/−). A nano colourant is followed by “(nano)”. Warnings tied to specific colourants must appear when the annex requires them. Update the INCI declaration together with the rest of the label and check it against the CPSR.

Golden scales of justice in a study

Example: reading an Annex IV entry

Take a shade that you sell in a lipstick and in a body wash. Annex IV may allow one colourant in all cosmetic products, a second one only in products that are not applied near the eye, and a third one only in products that stay briefly on the skin. If your range uses the same pigment in a mascara, a lip product and a shower gel, you may have to check three different conditions. Write the result in a simple table per product, and give it to the safety assessor with the supplier data.

함께 읽어보세요 화장품 안전역(MoS): 계산 방법

Stability and compatibility of colours

Changing a colourant can alter the look, the pH and the stability of the product. Pigments can fade, bleed or react with the preservative system or packaging. Run a stability test on the new shade, and where you also adapt the preservative system, repeat the challenge test. Colour change is one of the first visible signs of an unstable formula.

A practical export checklist for colours

  1. List every colourant with INCI name, US name and CI number.
  2. Check each CI number in Annex IV, including product type and area of use.
  3. Collect supplier specifications and purity data for the EU.
  4. Replace or reformulate any unlisted or restricted shade.
  5. Update the ingredient list with CI numbers and any nano marks.
  6. Retest stability for changed shades.
  7. Give the final list to the safety assessor for the CPSR.

Frequently asked questions

Does my FDA certification count in the EU?

No. The EU has no equivalent batch certification and does not recognise it as proof of compliance. The EU test is whether the colourant is on Annex IV, used within its conditions and sufficiently pure.

Can I keep the US colour names on the label?

No. EU ingredient lists use CI numbers for colourants. You can keep US names on the US version of the label.

Is a natural colour automatically allowed?

No. A natural colourant must be on Annex IV like any other, and some natural extracts are treated as ordinary ingredients rather than colourants, depending on their use.

Key takeaways

  • The US uses FDA approval and batch certification; the EU uses a positive list in Annex IV.
  • Check each CI number for product type, area of use and concentration.
  • Show colourants by CI number on the EU label.
  • Retest stability after a shade change and document it in the CPSR.
출처 (5)
출처 발행처 링크
Regulation (EC) No 1223/2009 on cosmetic products European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2009/1223/oj
Cosmetic Products Regulation, Annex IV - Allowed Colorants ECHA echa.europa.eu/es/cosmetics-colorant/-/legislationlist/details/EU-COSM_PROD-ANX_IV_ALLOW_COLORANT-100.032.208-VSK-G28PB5
Color Additives and Cosmetics U.S. Food and Drug Administration fda.gov/industry/cosmetics/color-additives-and-cosmetics
Color Certification FAQs U.S. Food and Drug Administration fda.gov/industry/color-certification/color-certification-faqs
Color additives in 21 CFR Part 74, Subpart C (cosmetics) eCFR ecfr.gov/current/title-21/chapter-I/subchapter-A/part-74/subpart-C

함께 읽어 보세요

모든 글 →
첫 주문 10% 할인, 번들 20% 할인!
패키지 할인은 모두에게 적용됩니다. 10% 할인은 무료 계정을 만들고 이메일을 인증하세요.
시작하기

이전 CPSR 안전성 보고서을(를) 수정하시겠습니까, 아니면 새로 시작하시겠습니까?

장바구니에 담았습니다

CPSR 안전성 보고서와(과) 입력하신 모든 내용이 장바구니에 담겼습니다. 결제 단계로 이동해 주문을 완료하시거나, 계속해서 시험을 추가하십시오 — 입력하신 답변은 이 항목에 그대로 유지됩니다.

결제하기
CPSR 보고서 주문
초안이 복원되었습니다
1
회사
2
제품
3
포장
4
처방
5
시험
6
아트워크
7
검토

제품 양식을 작성해 주십시오. 당사의 안전성 평가자가 곧 주문을 확인해 드립니다.

I. 안전성 평가를 주문하는 개인 / 회사
II. 제품 정보
III. 사용 조건 및 포장
IV. 제품 처방
#INCI 명칭CAS 번호나노제품 내 %
함유할 수 있음
합계0/ 100%
V. 완제품의 규격 및 시험

다음과 같은 미생물학적 저위험 제품을 제외한 모든 화장품에는 챌린지 테스트가 필요합니다:

  • 물을 함유하지 않았거나 수분 활성도가 낮은 제품
  • pH가 3 미만이거나 10 초과인 제품
  • 알코올이 20%를 초과하여 함유된 제품
  • 적대적인 환경을 만드는 원료(강한 산화제, 극성 유기 용매, 산화 염료, 알루미늄 클로로하이드레이트 및 관련 염, 분사 가스 등)를 함유한 제품
  • 65 °C 초과로 용기에 충전되는 제품
  • 가압 용기, 펌프 디스펜서 또는 1회용 단위로 포장된 제품
챌린지 테스트가 필요하지 않은 경우는 언제입니까?

다음과 같은 미생물학적 저위험 제품을 제외한 모든 화장품에는 챌린지 테스트가 필요합니다:

  • 물을 함유하지 않았거나 수분 활성도가 낮은 제품
  • pH가 3 미만이거나 10 초과인 제품
  • 알코올이 20%를 초과하여 함유된 제품
  • 적대적인 환경을 만드는 원료(강한 산화제, 극성 유기 용매, 산화 염료, 알루미늄 클로로하이드레이트 및 관련 염, 분사 가스 등)를 함유한 제품
  • 65 °C 초과로 용기에 충전되는 제품
  • 가압 용기, 펌프 디스펜서 또는 1회용 단위로 포장된 제품
VI. 제품 포장 및 아트워크선택 사항 — 완성된 CPSR과 라벨을 대조 확인하므로 외부 포장과 1차 용기의 아트워크를 제공해 주시면 도움이 됩니다. 나중에 보내 주셔도 됩니다.
VII. 주문 검토
가격—

이전 안전보건자료(Safety Data Sheet)을(를) 수정하시겠습니까, 아니면 새로 시작하시겠습니까?

장바구니에 담았습니다

안전보건자료(Safety Data Sheet)와(과) 입력하신 모든 내용이 장바구니에 담겼습니다. 결제 단계로 이동해 주문을 완료하시거나, 계속해서 시험을 추가하십시오 — 입력하신 답변은 이 항목에 그대로 유지됩니다.

결제하기
물질안전보건자료 주문
초안이 복원되었습니다
1
고객
2
처방
3
언어
4
세부 정보
5
검토

아래 양식을 작성해 주십시오. REACH를 준수하는 SDS를 신속하게 준비해 드립니다.

I. 고객 정보
고객
SDS 보유자
II. 제품 처방 정보
#INCI 명칭CAS 번호제품 내 %
합계0/ 100%

성분 목록이 길으십니까? 스프레드시트로 시작해 보세요.

템플릿을 다운로드하여 Excel, Numbers, LibreOffice 또는 Google Sheets에서 작성한 후 여기에 업로드하세요 — 모든 항목이 알맞은 위치에 입력됩니다. 양식을 직접 작성하셔도 동일합니다.

템플릿 다운로드(.xlsx) 또는 .csv
III. 규제 지역 및 언어 버전SDS는 제품이 출시되는 모든 시장의 공식 언어로 제공되어야 합니다. 유통하는 시장을 모두 선택해 주십시오 — 선택하신 항목마다 하나의 언어 버전을 발행합니다.
0개 선택됨
IV. 제품에 대한 추가 정보이 단계의 모든 항목은 선택 사항이지만, 많이 알려 주실수록 SDS를 더 빠르게 완성할 수 있습니다.
V. 주문 검토
시작가—
주문 데이터

이 항목에 대해 입력하신 모든 내용입니다.

이용 방법

시장 출시 준비를 위한 두 가지 방법 중 편한 쪽을 선택하십시오.

필요한 것을 알고 있습니다

시험 선택 & 결제

1 시험을 장바구니에 담고 결제하기
2 샘플의 DHL 무료 수거를 저희가 준비합니다
3 저희가 시험하고 결과를 전달해 드립니다
시험 & CPSR 주문하기

무엇이 필요한지 잘 모르겠습니다

제품 정보 추가 & 추천 받기

1 로그인하고 제품 정보를 추가하여 필요한 항목 확인하기
2 필요한 시험을 주문하면 수거는 저희가 준비합니다
3 시험이 끝나면 결과를 받으실 수 있습니다
시작하기
아직 확실하지 않으십니까? 설문에 답하기