您的购物车

每个订单均已包含运输/取件费用。
您的购物车是空的
添加检测即可开始
浏览测试
Cosmetic Testing Lab

FDA Color Additives vs EU CI Numbers: What Changes on Export

21 11 月, 2026  ·  阅读约 7 分钟

FDA Color Additives vs EU CI Numbers: What Changes on Export

If you export a US cosmetic, the shade list needs a check of its own. This guide to FDA color additives vs EU CI numbers explains how the two systems approve colours, what changes on your formula and label, and how to avoid surprises when a shade that is fine in the US is limited or missing in Europe. It is general information, not legal advice.

目录
  1. The short answer
  2. How the FDA regulates colour additives
  3. How the EU regulates colourants
  4. Mapping US names to CI numbers
  5. Batch certification versus EU purity checks
  6. Special cases to flag early
  7. What changes on the label
  8. Example: reading an Annex IV entry
  9. Stability and compatibility of colours
  10. A practical export checklist for colours
  11. Frequently asked questions
  12. Key takeaways

The short answer

In the US, colour additives need FDA approval for their intended use and many are batch-certified by the FDA; in the EU, colourants must be listed in Annex IV of Regulation (EC) No 1223/2009, are identified by Colour Index (CI) numbers, and carry conditions on the type of product or area of use. There is no EU batch certification. Instead, the Responsible Person and the safety assessor must be satisfied that each colourant is listed, used within its conditions and sufficiently pure, which is documented in the CPSR. Check every shade before you reprint labels or ship.

How the FDA regulates colour additives

In the US, a colour additive may not be used in a cosmetic unless the FDA has approved it for that intended use. The approved colours fall into two groups. Certifiable colours (listed in 21 CFR Parts 74 and 82) have names such as FD&C Blue No. 1, D&C Red No. 7 or Ext. D&C Violet No. 2. Each batch must be certified by the FDA before it is used. Exempt colours (21 CFR Part 73) include many mineral and natural colours, such as iron oxides, titanium dioxide, mica and carmine, and do not need batch certification. Both groups come with identity, purity and use limits, for example colours permitted for external use only or not for use near the eye.

The FDA also notes that a CI or E number does not indicate FDA certification. A shade can have a CI number and still not be allowed for your product in the US.

延伸阅读 化妆品纳米材料法规:规则与通报

How the EU regulates colourants

Annex IV of Regulation (EC) No 1223/2009 is the positive list of colourants allowed in cosmetics. Each entry gives the CI number, the colour name and a field of application. Typical conditions are “all cosmetic products”, “not to be used in eye products” or “not to be used in products applied on mucous membranes”, and some entries set a maximum concentration or require a specific purity or label wording. Colourants intended only to colour hair are handled under a different part of the regulation (the hair dye rules), not Annex IV.

The result: a US shade can be fully legal at home and still be limited, restricted to certain product types, or absent from the EU list.

Table comparing FDA colour additive rules and EU Annex IV colourant rules for approval, naming, batch control, conditions, labels and proof.

Mapping US names to CI numbers

Many FDA certifiable colours have a matching CI number, but the name and the legal status must both be checked. Use this process:

  1. Take each colourant from your formula, with the supplier’s INCI name and CI number.
  2. Find the CI number in Annex IV, for example in the Commission’s CosIng database or the consolidated regulation.
  3. Read the conditions: product type, area of use, maximum concentration, label text.
  4. Compare with your product. A lipstick, a mascara and a body wash may meet very different conditions with the same shade.
  5. Note lakes and pigments. A lake has its own CI number, often with a suffix after the colon, and must be listed too.

Ask your supplier for a specification stating the CI number, the purity and the compliance with the EU list. A US-only certificate is not enough for the safety file.

Batch certification versus EU purity checks

US batch certification does not travel to the EU. The EU does not certify batches, and the Responsible Person remains responsible for ensuring that the colourants in each batch meet the requirements. In practice, this means supplier specifications, certificates of analysis and, where the formula calls for it, the impurity review that the safety assessor performs. Heavy metals and other impurities in pigments need particular attention.

延伸阅读 化妆品中的 CMR 物质详解:哪些被禁用

Special cases to flag early

  • Titanium dioxide (CI 77891). It remains listed for cosmetics, but its classification for inhalation in powder form has led to extra rules and scrutiny. Check the current text for loose powders and sprays.
  • Nanomaterials. Nano-form pigments need separate notification and labelling in the EU.
  • Eye-area products. Some colourants are allowed in the US eye area only if specifically approved, and the EU has its own conditions. Check both.
  • Natural colours. Plant extracts such as annatto or beta-carotene may be exempt in the US and be listed by CI numbers in the EU, but only the entries on Annex IV count. A natural origin does not exempt a colourant from the list.
  • Hair colours. These follow different rules in both systems and need their own review.

What changes on the label

The EU ingredient list shows colourants by CI number, using the CI prefix, and not by FD&C or D&C names. Decorative products sold in several shades may list all colourants of the range with “may contain” (or +/−). A nano colourant is followed by “(nano)”. Warnings tied to specific colourants must appear when the annex requires them. Update the INCI declaration together with the rest of the label and check it against the CPSR.

Golden scales of justice in a study

Example: reading an Annex IV entry

Take a shade that you sell in a lipstick and in a body wash. Annex IV may allow one colourant in all cosmetic products, a second one only in products that are not applied near the eye, and a third one only in products that stay briefly on the skin. If your range uses the same pigment in a mascara, a lip product and a shower gel, you may have to check three different conditions. Write the result in a simple table per product, and give it to the safety assessor with the supplier data.

延伸阅读 化妆品安全边际(MoS):计算方法

Stability and compatibility of colours

Changing a colourant can alter the look, the pH and the stability of the product. Pigments can fade, bleed or react with the preservative system or packaging. Run a stability test on the new shade, and where you also adapt the preservative system, repeat the challenge test. Colour change is one of the first visible signs of an unstable formula.

A practical export checklist for colours

  1. List every colourant with INCI name, US name and CI number.
  2. Check each CI number in Annex IV, including product type and area of use.
  3. Collect supplier specifications and purity data for the EU.
  4. Replace or reformulate any unlisted or restricted shade.
  5. Update the ingredient list with CI numbers and any nano marks.
  6. Retest stability for changed shades.
  7. Give the final list to the safety assessor for the CPSR.

Frequently asked questions

Does my FDA certification count in the EU?

No. The EU has no equivalent batch certification and does not recognise it as proof of compliance. The EU test is whether the colourant is on Annex IV, used within its conditions and sufficiently pure.

Can I keep the US colour names on the label?

No. EU ingredient lists use CI numbers for colourants. You can keep US names on the US version of the label.

Is a natural colour automatically allowed?

No. A natural colourant must be on Annex IV like any other, and some natural extracts are treated as ordinary ingredients rather than colourants, depending on their use.

Key takeaways

  • The US uses FDA approval and batch certification; the EU uses a positive list in Annex IV.
  • Check each CI number for product type, area of use and concentration.
  • Show colourants by CI number on the EU label.
  • Retest stability after a shade change and document it in the CPSR.
来源 (5)
来源 发布方 链接
Regulation (EC) No 1223/2009 on cosmetic products European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2009/1223/oj
Cosmetic Products Regulation, Annex IV - Allowed Colorants ECHA echa.europa.eu/es/cosmetics-colorant/-/legislationlist/details/EU-COSM_PROD-ANX_IV_ALLOW_COLORANT-100.032.208-VSK-G28PB5
Color Additives and Cosmetics U.S. Food and Drug Administration fda.gov/industry/cosmetics/color-additives-and-cosmetics
Color Certification FAQs U.S. Food and Drug Administration fda.gov/industry/color-certification/color-certification-faqs
Color additives in 21 CFR Part 74, Subpart C (cosmetics) eCFR ecfr.gov/current/title-21/chapter-I/subchapter-A/part-74/subpart-C

延伸阅读

所有文章 →
首单立减 10%,套餐立减 20%!
套餐优惠人人可享。如需享受 10% 折扣,请创建免费账户并确认邮箱。
立即开始

编辑之前的CPSR 安全报告,还是新建一个?

已加入购物车

您的 CPSR 安全报告 以及您填写的所有内容现已在购物车中。请前往结账完成订单,或继续添加测试,您的答案会保留在此项目中。

前往结账
订购 CPSR 报告
草稿已恢复
1
公司
2
产品
3
包装
4
配方
5
检测
6
包装设计稿
7
核对

请填写产品表单。我们的安全评估人员将尽快确认您的订单。

I. 订购安全评估的个人 / 公司
II. 产品信息
III. 使用条件与包装
IV. 产品配方
#INCI 名称CAS 编号纳米产品中的 %
可能含有
合计0/ 100%
V. 成品的规格与测试

除微生物低风险产品外,所有化妆品均需进行挑战测试。微生物低风险产品包括:

  • 不含水或水活度低的产品
  • pH 低于 3 或高于 10 的产品
  • 酒精含量超过 20% 的产品
  • 含有会形成恶劣环境的原料的产品(强氧化剂、极性有机溶剂、氧化性染料、氯化羟铝及相关盐类、抛射气体等)
  • 在 65 °C 以上灌装的产品
  • 装入加压容器、泵式分配器或单剂量包装的产品
什么情况下无需挑战测试?

除微生物低风险产品外,所有化妆品均需进行挑战测试。微生物低风险产品包括:

  • 不含水或水活度低的产品
  • pH 低于 3 或高于 10 的产品
  • 酒精含量超过 20% 的产品
  • 含有会形成恶劣环境的原料的产品(强氧化剂、极性有机溶剂、氧化性染料、氯化羟铝及相关盐类、抛射气体等)
  • 在 65 °C 以上灌装的产品
  • 装入加压容器、泵式分配器或单剂量包装的产品
VI. 产品包装与设计稿选填 — 我们会将标签与最终 CPSR 核对,因此外包装和内包装容器的设计稿会很有帮助。您也可以稍后再发送给我们。
VII. 核对您的订单
价格—

编辑之前的安全数据表,还是新建一个?

已加入购物车

您的 安全数据表 以及您填写的所有内容现已在购物车中。请前往结账完成订单,或继续添加测试,您的答案会保留在此项目中。

前往结账
订购安全数据表(SDS)
草稿已恢复
1
客户
2
配方
3
语言
4
详情
5
核对

请填写下方表单。我们将为您快速准备符合 REACH 的 SDS。

I. 客户信息
客户
SDS 持有人
II. 产品配方信息
#INCI 名称CAS 编号产品中的 %
合计0/ 100%

成分表很长?从我们的电子表格开始吧。

下载模板,用 Excel、Numbers、LibreOffice 或 Google 表格填写后上传到此处,每个字段都会落到正确的位置。手动填写表单同样可行。

下载模板(.xlsx) 或 .csv
III. 法规区域与语言版本SDS 必须以产品投放的每个市场的官方语言提供。请选择您销售的每个市场 — 每选一项,我们出具一个语言版本。
已选 0 项
IV. 产品的补充信息此步骤的所有内容均为选填,但您提供得越多,我们完成 SDS 的速度就越快。
V. 核对您的订单
起价—
订单数据

您为此项目填写的所有内容。

服务流程

两种方式让产品做好上市准备—选择适合您的一种。

我知道自己需要什么

选择测试并结账

1 将测试加入购物车并结账
2 我们为您安排免费 DHL 取件取走样品
3 我们进行测试,您获得结果
订购检测 & CPSR

我不确定自己需要什么

添加产品信息并获取推荐

1 登录并添加产品信息,查看您的需求
2 订购所需测试—我们安排取件
3 测试完成后您即可获得结果
立即开始
仍不确定? 回答问卷