O seu carrinho

O envio / recolha está sempre incluído em todas as encomendas.
O seu carrinho está vazio
Adicione um teste para começar
Ver testes
Cosmetic Testing Lab

Allowed in the US, Banned in the EU: Ingredients to Check

Novembro 21, 2026  ·  7 min de leitura

Allowed in the US, Banned in the EU: Ingredients to Check

Many brands assume that a formula sold legally in the US can be shipped to Europe unchanged. It cannot always be. Several ingredients banned in the EU are still allowed in the US, and the EU also caps or conditions many more that US law leaves to the brand’s own judgement. This guide shows why the lists differ, gives verified examples, and sets out a practical check you can run before you export.

Índice
  1. The short answer
  2. Why do the two systems differ?
  3. Example 1: Lilial (butylphenyl methylpropional)
  4. Example 2: HICC (Lyral)
  5. Example 3: Methylisothiazolinone in leave-on products
  6. Example 4: Parabens
  7. Other groups that need a second look
  8. A six-step check before you export
  9. What if an ingredient fails?
  10. Common mistakes
  11. Frequently asked questions
  12. Key takeaways

The short answer

US federal law prohibits or restricts only a short list of cosmetic ingredients by name, while the EU keeps long annexes of banned and restricted substances in Regulation (EC) No 1223/2009. Ingredients such as Lilial, HICC (Lyral) and methylisothiazolinone in leave-on products can be legal in the US yet cannot be placed on the EU market. Before exporting, compare every ingredient and its concentration with the EU annexes, and have the result reviewed in the safety assessment (CPSR).

Why do the two systems differ?

The US framework puts the responsibility on the company: a cosmetic must be safe, properly labeled and not adulterated, and the FDA can act when a problem appears. Beyond a few named substances and the colour additive rules, there is no general positive or negative ingredient list. The FDA’s own page on prohibited and restricted ingredients names only a handful by regulation: bithionol, chlorofluorocarbon propellants, chloroform, halogenated salicylanilides, hexachlorophene, mercury compounds, methylene chloride, certain cattle materials, vinyl chloride and zirconium-containing complexes in aerosols, plus the rules for sunscreen ingredients and colour additives. The EU works differently. Its cosmetics Regulation lists prohibited substances in Annex II (well over a thousand entries), restricted ones in Annex III, and approved colourants, preservatives and UV filters in Annexes IV, V and VI. Article 15 also bans substances classified as carcinogenic, mutagenic or toxic for reproduction (CMR 1A or 1B) unless specific conditions are met.

The result: the EU list is updated regularly, so a formula that was acceptable two years ago may need review today.

Leia também Substâncias CMR nos cosméticos explicadas: o que está proibido

Example 1: Lilial (butylphenyl methylpropional)

Lilial is a fragrance ingredient with a soft floral note. In the EU it was prohibited by Commission Regulation (EU) 2021/1902, with the ban applying from 1 March 2022, after it was classified as toxic for reproduction. It is covered by the CMR rules and also affects products already on the shelf, not just new ones. The FDA’s allergen page lists Lilial among older fragrance allergens and notes that it is no longer in the EU list because the EU no longer permits it in cosmetics. Nothing in the US cosmetic rules by name stops its use. If your fragrance supplier uses it, your product may need a new fragrance before export.

Example 2: HICC (Lyral)

HICC, also called Lyral, is another fragrance ingredient that was removed from the EU market because of its link to contact allergy. The FDA allergen page notes it is no longer in the EU list because the EU no longer permits it. As with Lilial, this is a case where an older fragrance formula can contain a substance that is fine for US sale but not for the EU. Ask your fragrance house for the full composition, not only an IFRA certificate.

Table comparing how the US and the EU treat Lilial, HICC, methylisothiazolinone and parabens in cosmetics.

Example 3: Methylisothiazolinone in leave-on products

Methylisothiazolinone (MIT) is a preservative. After a rise in allergic reactions, the EU banned it in leave-on cosmetics (Commission Regulation (EU) 2016/1198, applying from early 2017) and later reduced the permitted level in rinse-off products to a very low figure. In the US no federal rule names MIT, so it can still appear in leave-on products. For an exporter, this matters for lotions, creams and wipes. Check the current Annex V entry and replace the preservative if the product is leave-on. A replacement system must be proven, which means a new challenge test.

Leia também Ingredientes cosméticos proibidos na UE: guia dos Anexos II e III

Example 4: Parabens

The EU did not ban all parabens. It prohibited five of them (isopropylparaben, isobutylparaben, phenylparaben, benzylparaben and pentylparaben) and limited propylparaben and butylparaben to a combined maximum of 0.14%, with extra conditions for leave-on products intended for the nappy area of children under three. Methylparaben and ethylparaben remain permitted within their annex limits. Check the current Annex II and V texts, because details have been amended. In the US there is no federal ban on these parabens, so a formula can contain a level or type that an EU assessor will not accept.

Other groups that need a second look

Banned substances are only part of the picture. Allowed ingredients also face conditions in the EU:

  • Colourants (Annex IV): only listed colourants and uses are allowed, and several US colour additives have no EU equivalent.
  • UV filters (Annex VI): the approved list and maximum concentrations differ from US sunscreen rules.
  • Preservatives (Annex V): a positive list with maximum levels and conditions.
  • Fragrance allergens: Regulation (EU) 2023/1545 requires named allergens on the label above set thresholds.
  • Nanomaterials: they need notification and are checked individually.
  • Microplastics: an EU restriction on intentionally added synthetic polymer microparticles is being phased in, with different dates by product type.

The lists are not symmetrical: a few ingredients are accepted in the EU but not in the US, so the check works in both directions when you import.

A six-step check before you export

  1. Export the full formula with INCI names, CAS numbers and percentages, including the fragrance and any premixes.
  2. Look up each ingredient in the EU cosmetic ingredient database (CosIng) and the Annexes II to VI.
  3. Check concentrations and conditions, such as product type, body area, age group and combined limits across related ingredients.
  4. Screen for CMR classification and for recent amendments, since the annexes change.
  5. Review the fragrance with your supplier, including allergens above the labeling thresholds.
  6. Record the outcome in your product file. The safety assessor will reach the same conclusions from the data, so it saves time to arrive prepared. Our guide on what a CPSR is shows what the assessor evaluates.
Two scientists in lab coats preparing an experiment

Leia também Regulamento dos cosméticos sobre nanomateriais: regras e notificação

What if an ingredient fails?

You usually have three options. First, replace the ingredient with an EU-compliant alternative that performs similarly. Second, adjust the level to the permitted maximum if the substance is restricted rather than banned. Third, make an EU-specific version of the product and keep the original for the US. In all cases, reformulation changes stability and preservation. Re-run the stability test for the new formula and the challenge test for water-containing products before the assessor signs off. Do not assume that existing US data automatically carries over.

Common mistakes

  • Checking only the main actives and forgetting fragrance, preservatives and colour premixes.
  • Relying on “FDA compliant” as proof the formula is EU-ready.
  • Using an old ingredient list from a supplier without checking recent annex changes.
  • Replacing a preservative without repeating preservation testing.
  • Assuming that a transition period lets you ship old US stock to the EU.

Frequently asked questions

Is a US cosmetic with Lilial illegal in the EU?

Yes, a cosmetic containing Lilial can no longer be placed on the EU market since the ban applied from 1 March 2022. The same product can still be marketed in the US, because no federal rule names the substance.

Where can I check whether an ingredient is allowed?

Start with the annexes of Regulation (EC) No 1223/2009 on EUR-Lex and the CosIng database, then confirm the current wording, because annexes are amended often. Your safety assessor will do the same check formally.

Does MoCRA bring the US closer to the EU list?

MoCRA adds registration, listing, safety substantiation and adverse event reporting, but it does not copy the EU annexes. Ingredient bans remain mostly different between the two systems.

Key takeaways

  • Gap: the US names a few banned ingredients; the EU keeps long annexes.
  • Examples: Lilial, HICC, MIT in leave-on products and some parabens are treated differently.
  • Check: screen every ingredient, including the fragrance, against Annexes II to VI before export.
  • Reformulate: a replacement needs new stability and, for water-based products, new challenge test data.
Fontes (6)
Fonte Editor Ligação
Prohibited & Restricted Ingredients in Cosmetics U.S. Food and Drug Administration fda.gov/cosmetics/cosmetics-laws-regulations/prohibited-restricted-ingredients-cosmetics
Allergens in Cosmetics U.S. Food and Drug Administration fda.gov/cosmetics/cosmetic-ingredients/allergens-cosmetics
Regulation (EC) No 1223/2009 on cosmetic products (Annexes II to VI) European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2009/1223/oj
Bans on substances under EU cosmetics law (Lilial, Regulation (EU) 2021/1902) CMS Legal cms.law/en/deu/legal-updates/Bans-on-substances-under-EU-cosmetics-law
Fragrance allergens: Commission Regulation (EU) 2023/1545 European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2023/1545/oj
Microplastics restriction: Commission Regulation (EU) 2023/2055 European Commission single-market-economy.ec.europa.eu/sectors/chemicals/reach/restrictions/commission-regulation-eu-20232055-restriction-microplastics-intentionally-added-products_en

Leia também

Todos os artigos →
Poupe 10% na primeira encomenda e 20% em packs!
Desconto em pacotes para todos. Para os 10 %, crie uma conta gratuita e confirme o seu e-mail.
Começar

Relatório de Segurança CPSR: editar um documento anterior ou começar um novo?

Adicionado ao seu carrinho

O seu Relatório de Segurança CPSR e tudo o que preencheu estão agora no carrinho. Avance para o checkout para concluir a encomenda ou continue a adicionar testes — as suas respostas ficam associadas a este item.

Ir para o checkout
Encomendar Relatório CPSR
Rascunho restaurado
1
Empresa
2
Produto
3
Embalagem
4
Fórmula
5
Testes
6
Arte-final
7
Revisão

Preencha o formulário do produto. Os nossos avaliadores de segurança confirmarão a sua encomenda em breve.

I. Pessoa / empresa que encomenda a avaliação de segurança
II. Informações do produto
III. Condições de utilização e embalagem
IV. Fórmula do produto
#Designação INCINúmero CASNano% no produto
Pode conter
Total0/ 100%
V. Especificações e testes do produto acabado

É necessário um challenge test para todos os produtos cosméticos, exceto os de baixo risco microbiológico, que são:

  • Produtos que não contêm água ou têm baixa atividade da água
  • Produtos com pH inferior a 3 ou superior a 10
  • Produtos com mais de 20% de álcool
  • Produtos que contêm matérias-primas que criam um ambiente hostil (oxidantes fortes, solventes orgânicos polares, corantes oxidantes, clorohidrato de alumínio e sais afins, gases propulsores, etc.)
  • Produtos enchidos em recipientes a mais de 65 °C
  • Produtos embalados em recipientes pressurizados, doseadores de bomba ou unidades de dose única
Quando não é necessário um challenge test?

É necessário um challenge test para todos os produtos cosméticos, exceto os de baixo risco microbiológico, que são:

  • Produtos que não contêm água ou têm baixa atividade da água
  • Produtos com pH inferior a 3 ou superior a 10
  • Produtos com mais de 20% de álcool
  • Produtos que contêm matérias-primas que criam um ambiente hostil (oxidantes fortes, solventes orgânicos polares, corantes oxidantes, clorohidrato de alumínio e sais afins, gases propulsores, etc.)
  • Produtos enchidos em recipientes a mais de 65 °C
  • Produtos embalados em recipientes pressurizados, doseadores de bomba ou unidades de dose única
VI. Embalagem e arte-final do produtoOpcional — verificamos o rótulo em relação ao CPSR final, por isso a arte-final da embalagem exterior e do recipiente primário ajuda. Também a pode enviar mais tarde.
VII. Reveja a sua encomenda
Preço—

Ficha de Dados de Segurança: editar um documento anterior ou começar um novo?

Adicionado ao seu carrinho

O seu Ficha de Dados de Segurança e tudo o que preencheu estão agora no carrinho. Avance para o checkout para concluir a encomenda ou continue a adicionar testes — as suas respostas ficam associadas a este item.

Ir para o checkout
Encomendar Ficha de Dados de Segurança
Rascunho restaurado
1
Cliente
2
Fórmula
3
Idiomas
4
Detalhes
5
Revisão

Preencha o formulário abaixo. Prepararemos a sua SDS conforme com o REACH com um prazo de entrega rápido.

I. Informações sobre o cliente
O cliente
Titular da SDS
II. Informações sobre a fórmula do produto
#Designação INCINúmero CAS% no produto
Total0/ 100%

Tem uma lista de ingredientes extensa? Comece pela nossa folha de cálculo.

Descarregue o modelo, preencha-o no Excel, Numbers, LibreOffice ou Google Sheets e carregue-o aqui — cada campo fica no sítio certo. Preencher o formulário manualmente funciona igualmente bem.

Descarregar modelo (.xlsx) ou .csv
III. Área regulamentar e versões linguísticasUma SDS tem de ser fornecida na língua oficial de cada mercado onde o produto é colocado. Escolha cada mercado em que distribui — emitimos uma versão linguística por seleção.
0 selecionados
IV. Informações adicionais sobre o produtoTudo neste passo é opcional, mas quanto mais informação nos der, mais depressa podemos finalizar a SDS.
V. Reveja a sua encomenda
A partir de—
Dados da encomenda

Tudo o que preencheu para este item.

Como funciona

Duas formas de ficar pronto para o mercado — escolha a que lhe convém.

Sei do que preciso

Escolha os testes e finalize a compra

1 Adicione testes ao carrinho e finalize a compra
2 Organizamos a recolha DHL gratuita das suas amostras
3 Testamo-las e recebe os resultados
Encomendar testes & CPSR

Não sei do que preciso

Adicione informações do produto e receba recomendações

1 Inicie sessão e adicione informações do produto para ver o que precisa
2 Encomende os testes necessários — nós organizamos a recolha
3 Recebe os resultados depois de concluirmos os testes
Começar
Ainda tem dúvidas? Responda ao questionário