Il Suo carrello

Spedizione / ritiro sono sempre inclusi in ogni ordine.
Il Suo carrello è vuoto
Aggiunga un test per iniziare
Sfoglia i test
Cosmetic Testing Lab

Allowed in the US, Banned in the EU: Ingredients to Check

Novembre 21, 2026  ·  7 min di lettura

Allowed in the US, Banned in the EU: Ingredients to Check

Many brands assume that a formula sold legally in the US can be shipped to Europe unchanged. It cannot always be. Several ingredients banned in the EU are still allowed in the US, and the EU also caps or conditions many more that US law leaves to the brand’s own judgement. This guide shows why the lists differ, gives verified examples, and sets out a practical check you can run before you export.

Indice
  1. The short answer
  2. Why do the two systems differ?
  3. Example 1: Lilial (butylphenyl methylpropional)
  4. Example 2: HICC (Lyral)
  5. Example 3: Methylisothiazolinone in leave-on products
  6. Example 4: Parabens
  7. Other groups that need a second look
  8. A six-step check before you export
  9. What if an ingredient fails?
  10. Common mistakes
  11. Frequently asked questions
  12. Key takeaways

The short answer

US federal law prohibits or restricts only a short list of cosmetic ingredients by name, while the EU keeps long annexes of banned and restricted substances in Regulation (EC) No 1223/2009. Ingredients such as Lilial, HICC (Lyral) and methylisothiazolinone in leave-on products can be legal in the US yet cannot be placed on the EU market. Before exporting, compare every ingredient and its concentration with the EU annexes, and have the result reviewed in the safety assessment (CPSR).

Why do the two systems differ?

The US framework puts the responsibility on the company: a cosmetic must be safe, properly labeled and not adulterated, and the FDA can act when a problem appears. Beyond a few named substances and the colour additive rules, there is no general positive or negative ingredient list. The FDA’s own page on prohibited and restricted ingredients names only a handful by regulation: bithionol, chlorofluorocarbon propellants, chloroform, halogenated salicylanilides, hexachlorophene, mercury compounds, methylene chloride, certain cattle materials, vinyl chloride and zirconium-containing complexes in aerosols, plus the rules for sunscreen ingredients and colour additives. The EU works differently. Its cosmetics Regulation lists prohibited substances in Annex II (well over a thousand entries), restricted ones in Annex III, and approved colourants, preservatives and UV filters in Annexes IV, V and VI. Article 15 also bans substances classified as carcinogenic, mutagenic or toxic for reproduction (CMR 1A or 1B) unless specific conditions are met.

The result: the EU list is updated regularly, so a formula that was acceptable two years ago may need review today.

Leggi anche Sostanze CMR nei cosmetici: cosa è vietato

Example 1: Lilial (butylphenyl methylpropional)

Lilial is a fragrance ingredient with a soft floral note. In the EU it was prohibited by Commission Regulation (EU) 2021/1902, with the ban applying from 1 March 2022, after it was classified as toxic for reproduction. It is covered by the CMR rules and also affects products already on the shelf, not just new ones. The FDA’s allergen page lists Lilial among older fragrance allergens and notes that it is no longer in the EU list because the EU no longer permits it in cosmetics. Nothing in the US cosmetic rules by name stops its use. If your fragrance supplier uses it, your product may need a new fragrance before export.

Example 2: HICC (Lyral)

HICC, also called Lyral, is another fragrance ingredient that was removed from the EU market because of its link to contact allergy. The FDA allergen page notes it is no longer in the EU list because the EU no longer permits it. As with Lilial, this is a case where an older fragrance formula can contain a substance that is fine for US sale but not for the EU. Ask your fragrance house for the full composition, not only an IFRA certificate.

Table comparing how the US and the EU treat Lilial, HICC, methylisothiazolinone and parabens in cosmetics.

Example 3: Methylisothiazolinone in leave-on products

Methylisothiazolinone (MIT) is a preservative. After a rise in allergic reactions, the EU banned it in leave-on cosmetics (Commission Regulation (EU) 2016/1198, applying from early 2017) and later reduced the permitted level in rinse-off products to a very low figure. In the US no federal rule names MIT, so it can still appear in leave-on products. For an exporter, this matters for lotions, creams and wipes. Check the current Annex V entry and replace the preservative if the product is leave-on. A replacement system must be proven, which means a new challenge test.

Leggi anche Ingredienti cosmetici vietati nell'UE: guida agli Allegati II e III

Example 4: Parabens

The EU did not ban all parabens. It prohibited five of them (isopropylparaben, isobutylparaben, phenylparaben, benzylparaben and pentylparaben) and limited propylparaben and butylparaben to a combined maximum of 0.14%, with extra conditions for leave-on products intended for the nappy area of children under three. Methylparaben and ethylparaben remain permitted within their annex limits. Check the current Annex II and V texts, because details have been amended. In the US there is no federal ban on these parabens, so a formula can contain a level or type that an EU assessor will not accept.

Other groups that need a second look

Banned substances are only part of the picture. Allowed ingredients also face conditions in the EU:

  • Colourants (Annex IV): only listed colourants and uses are allowed, and several US colour additives have no EU equivalent.
  • UV filters (Annex VI): the approved list and maximum concentrations differ from US sunscreen rules.
  • Preservatives (Annex V): a positive list with maximum levels and conditions.
  • Fragrance allergens: Regulation (EU) 2023/1545 requires named allergens on the label above set thresholds.
  • Nanomaterials: they need notification and are checked individually.
  • Microplastics: an EU restriction on intentionally added synthetic polymer microparticles is being phased in, with different dates by product type.

The lists are not symmetrical: a few ingredients are accepted in the EU but not in the US, so the check works in both directions when you import.

A six-step check before you export

  1. Export the full formula with INCI names, CAS numbers and percentages, including the fragrance and any premixes.
  2. Look up each ingredient in the EU cosmetic ingredient database (CosIng) and the Annexes II to VI.
  3. Check concentrations and conditions, such as product type, body area, age group and combined limits across related ingredients.
  4. Screen for CMR classification and for recent amendments, since the annexes change.
  5. Review the fragrance with your supplier, including allergens above the labeling thresholds.
  6. Record the outcome in your product file. The safety assessor will reach the same conclusions from the data, so it saves time to arrive prepared. Our guide on what a CPSR is shows what the assessor evaluates.
Two scientists in lab coats preparing an experiment

Leggi anche Nanomateriali nei cosmetici: regole UE e notifica

What if an ingredient fails?

You usually have three options. First, replace the ingredient with an EU-compliant alternative that performs similarly. Second, adjust the level to the permitted maximum if the substance is restricted rather than banned. Third, make an EU-specific version of the product and keep the original for the US. In all cases, reformulation changes stability and preservation. Re-run the stability test for the new formula and the challenge test for water-containing products before the assessor signs off. Do not assume that existing US data automatically carries over.

Common mistakes

  • Checking only the main actives and forgetting fragrance, preservatives and colour premixes.
  • Relying on “FDA compliant” as proof the formula is EU-ready.
  • Using an old ingredient list from a supplier without checking recent annex changes.
  • Replacing a preservative without repeating preservation testing.
  • Assuming that a transition period lets you ship old US stock to the EU.

Frequently asked questions

Is a US cosmetic with Lilial illegal in the EU?

Yes, a cosmetic containing Lilial can no longer be placed on the EU market since the ban applied from 1 March 2022. The same product can still be marketed in the US, because no federal rule names the substance.

Where can I check whether an ingredient is allowed?

Start with the annexes of Regulation (EC) No 1223/2009 on EUR-Lex and the CosIng database, then confirm the current wording, because annexes are amended often. Your safety assessor will do the same check formally.

Does MoCRA bring the US closer to the EU list?

MoCRA adds registration, listing, safety substantiation and adverse event reporting, but it does not copy the EU annexes. Ingredient bans remain mostly different between the two systems.

Key takeaways

  • Gap: the US names a few banned ingredients; the EU keeps long annexes.
  • Examples: Lilial, HICC, MIT in leave-on products and some parabens are treated differently.
  • Check: screen every ingredient, including the fragrance, against Annexes II to VI before export.
  • Reformulate: a replacement needs new stability and, for water-based products, new challenge test data.
Fonti (6)
Fonte Editore Link
Prohibited & Restricted Ingredients in Cosmetics U.S. Food and Drug Administration fda.gov/cosmetics/cosmetics-laws-regulations/prohibited-restricted-ingredients-cosmetics
Allergens in Cosmetics U.S. Food and Drug Administration fda.gov/cosmetics/cosmetic-ingredients/allergens-cosmetics
Regulation (EC) No 1223/2009 on cosmetic products (Annexes II to VI) European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2009/1223/oj
Bans on substances under EU cosmetics law (Lilial, Regulation (EU) 2021/1902) CMS Legal cms.law/en/deu/legal-updates/Bans-on-substances-under-EU-cosmetics-law
Fragrance allergens: Commission Regulation (EU) 2023/1545 European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2023/1545/oj
Microplastics restriction: Commission Regulation (EU) 2023/2055 European Commission single-market-economy.ec.europa.eu/sectors/chemicals/reach/restrictions/commission-regulation-eu-20232055-restriction-microplastics-intentionally-added-products_en
Risparmi il 10% sul primo ordine e il 20% sui bundle!
Sconto sui pacchetti per tutti. Per il 10%, crea un account gratuito e conferma la tua email.
Inizia

Rapporto di sicurezza CPSR: modificare un documento precedente o iniziarne uno nuovo?

Aggiunto al carrello

Il Suo Rapporto di sicurezza CPSR e tutto ciò che ha compilato sono ora nel carrello. Vada al checkout per completare l'ordine, oppure continui ad aggiungere test: le Sue risposte restano associate a questo articolo.

Vai al checkout
Ordina il report CPSR
Bozza ripristinata
1
Azienda
2
Prodotto
3
Imballaggio
4
Formula
5
Test
6
Grafica
7
Riepilogo

Compili il modulo del prodotto. I nostri valutatori della sicurezza confermeranno a breve il Suo ordine.

I. Persona / azienda che ordina la valutazione della sicurezza
II. Informazioni sul prodotto
III. Condizioni d'uso e imballaggio
IV. Formula del prodotto
#Denominazione INCINumero CASNano% nel prodotto
Può contenere
Totale0/ 100%
V. Specifiche e test del prodotto finito

Il challenge test è richiesto per ogni prodotto cosmetico, tranne quelli a basso rischio microbiologico, che sono:

  • Prodotti che non contengono acqua o hanno una bassa attività dell'acqua
  • Prodotti con pH inferiore a 3 o superiore a 10
  • Prodotti con più del 20% di alcol
  • Prodotti contenenti materie prime che creano un ambiente ostile (forti agenti ossidanti, solventi organici polari, coloranti ossidanti, alluminio cloridrato e sali correlati, gas propellenti e così via)
  • Prodotti riempiti in contenitori a più di 65 °C
  • Prodotti confezionati in contenitori pressurizzati, erogatori a pompa o unità monodose
Quando il challenge test non è richiesto?

Il challenge test è richiesto per ogni prodotto cosmetico, tranne quelli a basso rischio microbiologico, che sono:

  • Prodotti che non contengono acqua o hanno una bassa attività dell'acqua
  • Prodotti con pH inferiore a 3 o superiore a 10
  • Prodotti con più del 20% di alcol
  • Prodotti contenenti materie prime che creano un ambiente ostile (forti agenti ossidanti, solventi organici polari, coloranti ossidanti, alluminio cloridrato e sali correlati, gas propellenti e così via)
  • Prodotti riempiti in contenitori a più di 65 °C
  • Prodotti confezionati in contenitori pressurizzati, erogatori a pompa o unità monodose
VI. Imballaggio e grafica del prodottoFacoltativo — controlliamo l'etichetta rispetto al CPSR finale, quindi la grafica dell'imballaggio esterno e del contenitore primario è utile. Può anche inviarcela in un secondo momento.
VII. Riepilogo del Suo ordine
Prezzo—

Scheda di dati di sicurezza: modificare un documento precedente o iniziarne uno nuovo?

Aggiunto al carrello

Il Suo Scheda di dati di sicurezza e tutto ciò che ha compilato sono ora nel carrello. Vada al checkout per completare l'ordine, oppure continui ad aggiungere test: le Sue risposte restano associate a questo articolo.

Vai al checkout
Ordina la scheda di dati di sicurezza
Bozza ripristinata
1
Cliente
2
Formula
3
Lingue
4
Dettagli
5
Riepilogo

Compili il modulo qui sotto. Prepareremo la Sua SDS conforme a REACH con tempi di consegna rapidi.

I. Informazioni sul cliente
Il cliente
Titolare della SDS
II. Informazioni sulla formula del prodotto
#Denominazione INCINumero CAS% nel prodotto
Totale0/ 100%

Ha un lungo elenco di ingredienti? Parta dal nostro foglio di calcolo.

Scarichi il modello, lo compili in Excel, Numbers, LibreOffice o Google Sheets, poi lo carichi qui: ogni campo finisce al posto giusto. Compilare il modulo a mano funziona altrettanto bene.

Scarica il modello (.xlsx) o .csv
III. Area normativa e versioni linguisticheUna SDS deve essere fornita nella lingua ufficiale di ogni mercato in cui il prodotto è immesso. Scelga ogni mercato in cui distribuisce — emettiamo una versione linguistica per ogni selezione.
0 selezionati
IV. Informazioni aggiuntive sul prodottoTutto in questo passaggio è facoltativo, ma più informazioni ci fornisce, più rapidamente potremo finalizzare la SDS.
V. Riepilogo del Suo ordine
A partire da—
Dati dell'ordine

Tutto ciò che ha compilato per questo articolo.

Come funziona

Due modi per essere pronti per il mercato — scelga quello che fa per Lei.

So cosa mi serve

Scelga i test & vada al checkout

1 Aggiunga i test al carrello & vada al checkout
2 Organizziamo noi il ritiro gratuito dei Suoi campioni con DHL
3 Li testiamo e Lei riceve i risultati
Ordina test e CPSR

Non so cosa mi serve

Aggiunga le informazioni sul prodotto & riceva consigli

1 Acceda & aggiunga le informazioni sul prodotto per vedere cosa Le serve
2 Ordini i test necessari — organizziamo noi il ritiro
3 Riceve i risultati al termine dei test
Inizia
Ancora indeciso? Risponda al questionario