Váš košík

Doprava / vyzvednutí je vždy zahrnuta v každé objednávce.
Váš košík je prázdný
Přidejte test a začněte
Procházet testy
Cosmetic Testing Lab

State Cosmetics Laws: PFAS Bans in WA, MN, ME, NY and More

21 listopadu, 2026  ·  7 min čtení

State Cosmetics Laws: PFAS Bans in WA, MN, ME, NY and More

California gets the attention, but state cosmetics laws on PFAS and other chemicals now reach well beyond it. Washington, Minnesota, Maine, Colorado, Maryland and Vermont have their own bans, with different scopes, dates and penalties, and New York is a state to watch. If you sell nationally, you need one compliance check that covers all of them. This guide compares the laws that matter most and shows how to build that check.

Obsah
  1. The short answer
  2. Why a state-by-state view matters
  3. Washington: the Toxic-Free Cosmetics Act (HB 1047)
  4. Minnesota: Amara’s Law
  5. Maine, Vermont and Colorado
  6. New York and other watch-list states
  7. Intentionally added versus trace PFAS
  8. Why the SDS will not settle this
  9. Build a multi-state compliance matrix
  10. Reformulating without breaking the product
  11. Common mistakes
  12. Frequently asked questions
  13. Key takeaways

The short answer

Several states ban intentionally added PFAS in cosmetics, namely Colorado, Maryland, Minnesota and Washington since 1 January 2025, and Maine and Vermont since 1 January 2026, while Washington also bans phthalates, formaldehyde, lead and other chemicals and Minnesota adds a PFAS reporting duty. New York has no enacted cosmetics ban that we could confirm; a bill is pending. The patchwork changes often, so this article is general information, not legal advice. Verify each date on the official pages in the sources before you rely on it.

Why a state-by-state view matters

The federal law, MoCRA, regulates facility registration, product listing and safety substantiation, but it does not set a national ingredient ban list. States have filled the gap. Because most brands ship nationwide, the strictest state in effect decides the formula. Marketplaces and retailers also ask for declarations that cover all states. If you already compared the EU and US approaches, you know the EU prohibited-ingredient list is long and centrally managed; in the US you have a growing set of local lists. Our guide to the CPSR shows how an EU safety assessment screens each ingredient, a habit worth copying for US state checks.

Čtěte také Nařízení EU o kosmetice 1223/2009 srozumitelně

Washington: the Toxic-Free Cosmetics Act (HB 1047)

Washington’s law, signed in May 2023, has the broadest ingredient list outside California. From 1 January 2025, it bans intentionally added:

  • PFAS
  • ortho-phthalates
  • formaldehyde and methylene glycol
  • mercury and mercury compounds
  • triclosan
  • m-phenylenediamine and o-phenylenediamine and their salts
  • lead and lead compounds (and lead at or above 1 ppm)

The law also lets the Department of Ecology restrict formaldehyde-releasing chemicals by rule, an initial set from 2026 and the rest from 2027 at the earliest. Retailers could sell existing stock until 1 January 2026, but that allowance did not extend to manufacturers. Manufacturers that produce, import or distribute non-compliant products face civil penalties per violation, with higher penalties for repeat offences. Check the session law text for the exact figures.

Minnesota: Amara’s Law

Minnesota Statute 116.943 prohibits selling, offering or distributing cosmetics with intentionally added PFAS, effective 1 January 2025. It covers 10 other product categories too. A cosmetic is defined as an article, excluding soap, applied to the body to cleanse, beautify or alter appearance, and components count too. Minnesota also created a reporting duty: manufacturers of products with intentionally added PFAS sold in the state must report details such as product description, purpose of the PFAS and amount by CAS number. The initial deadline of 1 January 2026 has been moved more than once (a September 2026 date has been reported), so confirm the current date with the Minnesota Pollution Control Agency. The statute also allows the agency to require test results and a certificate of compliance within 30 days of a request.

Table of US state cosmetics laws: Washington, Minnesota, Colorado, Maryland, Maine, Vermont and New York, with the rule and start date.

Maine, Vermont and Colorado

  • Maine: from 1 January 2026, selling cosmetics with intentionally added PFAS is prohibited. The ban also reaches products sold in a fluorinated container or one containing intentionally added PFAS, so packaging matters. Soap and prescription products are outside the definition.
  • Vermont: reported ban from 1 January 2026 on cosmetics with intentionally added PFAS, with a trace-amount exception for technically unavoidable presence. Confirm against the statute.
  • Colorado: HB 22-1345 prohibits selling or distributing cosmetics with intentionally added PFAS from 1 January 2025.

Maryland also bans a list of chemicals, including 13 named PFAS, in cosmetics from 1 January 2025. Connecticut is reported to phase in a labeling and notice requirement from mid-2026 and a full ban from 2028; verify before planning around it. Other states, such as New Jersey, Oregon and New Hampshire, are reported to be moving as well.

Čtěte také Odpovědná osoba pro kosmetiku (RP): kdo ji potřebuje

New York and other watch-list states

New York has enacted PFAS limits for apparel and menstrual products, but when we checked, we could not confirm an enacted cosmetics ban. The Beauty Justice Act, which would cover PFAS and other chemicals in personal care products, was still pending. Treat New York as a watch-list state and check the legislature’s site before shipping decisions.

Intentionally added versus trace PFAS

Most of these laws target intentionally added PFAS, meaning PFAS deliberately included to give the product a function such as water resistance or slip. Trace contamination from raw materials or processing is treated differently, and some laws include trace or unavoidable-use language while others leave it to rulemaking. A supplier’s statement that PFAS are “not intentionally added” is not an analytical result. Laboratory PFAS testing is a specialist field that we do not offer, so ask your supplier or a specialised lab, and keep the results in your file.

Why the SDS will not settle this

A safety data sheet lists classified hazards and ingredients above set thresholds. Many restricted substances, PFAS included, are not hazard-classified and may not appear. Use the SDS for transport, workplace and wholesale questions, and run a separate ingredient screen for state bans.

Čtěte také Oznámení v CPNP: jak zaregistrovat kosmetický přípravek

Build a multi-state compliance matrix

  1. List every SKU and every state you ship to, including marketplace sales.
  2. Export full ingredient lists with CAS numbers, including fragrance, colour and preservative components.
  3. Screen each ingredient against each state’s list; keep one matrix with ingredient, state, law, date and decision.
  4. Collect supplier declarations that cover PFAS, phthalates, formaldehyde releasers, lead and mercury.
  5. Check packaging: Maine looks at fluorinated containers.
  6. Set reminders for effective dates and review the matrix at least twice a year.
Smear of white cream on a beige surface

Reformulating without breaking the product

Replacing a PFAS ingredient usually means a new silicone, ester or polymer, and replacing a formaldehyde releaser means a new preservative system. Both change how the product behaves. Run stability tests on the new version, and a microbiological test on the finished product. For water-based formulas, a challenge test confirms that the new preservation system works. Batch-to-batch records show regulators and retailers that you acted in good time.

Common mistakes

  • Only following California: Washington adds lead and triclosan, and Maine looks at containers.
  • Trusting old stock: sell-through periods differ, and in Washington the one for retailers did not protect manufacturers.
  • Ignoring reporting laws: a product can be legal to sell but still require a report, as in Minnesota.
  • Relying on a single supplier email: ask for a signed declaration with CAS numbers and a date.
  • Assuming federal preemption: MoCRA has carve-outs that, in our reading of the FDA summary, leave state ingredient bans in place. Confirm with a US lawyer.

Frequently asked questions

Do these laws apply to online sales shipped into the state?

Generally yes. The laws apply to products sold, offered or distributed in the state, which normally includes online orders delivered there. Confirm with counsel for your situation.

Is soap covered?

Several laws, including Minnesota, Maine and Washington, exclude soap from the cosmetic definition, but the wording differs. Check each definition rather than assuming.

Can a CPSR help with US state laws?

A CPSR is an EU document, but its ingredient-by-ingredient review is a good base for US screening, because many state lists copy chemicals already prohibited in the EU. Our CPSR service gives you that file with a signed assessment.

Key takeaways

  • Six or more states ban intentionally added PFAS in cosmetics; Washington also bans phthalates, formaldehyde, lead and more.
  • Minnesota adds a PFAS reporting duty; Maine also reaches fluorinated containers.
  • New York remains pending; keep a watch list and re-check dates.
  • Keep a multi-state matrix, supplier declarations and re-test after any reformulation.
Zdroje (6)
Zdroj Vydavatel Odkaz
Washington Substitute House Bill 1047 (Toxic-Free Cosmetics Act), Session Laws 2023 Washington State Legislature lawfilesext.leg.wa.gov/biennium/2023-24/Htm/Bills/Session%20Laws/House/1047-S.SL.htm
Minnesota Statutes 116.943: Perfluoroalkyl and polyfluoroalkyl substances in products Minnesota Office of the Revisor of Statutes revisor.mn.gov/statutes/cite/116.943
Maine Revised Statutes, Title 38, section 1614: Perfluoroalkyl and polyfluoroalkyl substances Maine Legislature legislature.maine.gov/legis/statutes/38/title38sec1614.html
Colorado House Bill 22-1345 Colorado General Assembly leg.colorado.gov/bills/hb22-1345
Modernization of Cosmetics Regulation Act of 2022 (MoCRA) U.S. Food and Drug Administration fda.gov/cosmetics/cosmetics-laws-regulations/modernization-cosmetics-regulation-act-2022-mocra
State PFAS Bans in Cosmetics Expand Ahead of 2026 Morgan Lewis morganlewis.com/pubs/2025/12/state-pfas-bans-in-cosmetics-expand-ahead-of-2026

Přečtěte si také

Všechny články →
Ušetřete 10 % na první objednávce a 20 % na balíčcích!
Sleva na balíčky pro všechny. Pro 10 % si vytvořte bezplatný účet a potvrďte e-mail.
Začít

Upravit předchozí dokument Zpráva o bezpečnosti CPSR, nebo začít nový?

Přidáno do košíku

Váš produkt Zpráva o bezpečnosti CPSR a vše, co jste vyplnili, je nyní v košíku. Přejděte k pokladně a dokončete objednávku, nebo přidávejte další testy — vaše odpovědi zůstanou u této položky.

Přejít k pokladně
Objednat zprávu CPSR
Koncept obnoven
1
Společnost
2
Produkt
3
Obal
4
Receptura
5
Testy
6
Grafika
7
Kontrola

Vyplňte formulář produktu. Naši posuzovatelé bezpečnosti vaši objednávku brzy potvrdí.

I. Osoba / společnost objednávající posouzení bezpečnosti
II. Informace o produktu
III. Podmínky použití a obal
IV. Receptura produktu
#Název INCIČíslo CASNano% v produktu
Může obsahovat
Celkem0/ 100%
V. Specifikace a testy hotového produktu

Zátěžový test je vyžadován u každého kosmetického přípravku s výjimkou mikrobiologicky nízkorizikových, což jsou:

  • Přípravky, které neobsahují vodu nebo mají nízkou aktivitu vody
  • Produkty s pH pod 3 nebo nad 10
  • Produkty obsahující více než 20 % alkoholu
  • Přípravky obsahující suroviny, které vytvářejí nepřátelské prostředí (silná oxidační činidla, polární organická rozpouštědla, oxidační barviva, chlorhydrát hliníku a příbuzné soli, hnací plyny apod.)
  • Přípravky plněné do obalů při teplotě nad 65 °C
  • Přípravky balené v tlakových nádobách, pumpových dávkovačích nebo jednodávkových obalech
Kdy zátěžový test není vyžadován?

Zátěžový test je vyžadován u každého kosmetického přípravku s výjimkou mikrobiologicky nízkorizikových, což jsou:

  • Přípravky, které neobsahují vodu nebo mají nízkou aktivitu vody
  • Produkty s pH pod 3 nebo nad 10
  • Produkty obsahující více než 20 % alkoholu
  • Přípravky obsahující suroviny, které vytvářejí nepřátelské prostředí (silná oxidační činidla, polární organická rozpouštědla, oxidační barviva, chlorhydrát hliníku a příbuzné soli, hnací plyny apod.)
  • Přípravky plněné do obalů při teplotě nad 65 °C
  • Přípravky balené v tlakových nádobách, pumpových dávkovačích nebo jednodávkových obalech
VI. Obal a grafika produktuVolitelné — etiketu kontrolujeme oproti hotové CPSR, takže pomůže grafika vnějšího obalu a primární nádoby. Můžete nám ji poslat i později.
VII. Zkontrolujte svou objednávku
Cena—

Upravit předchozí dokument Bezpečnostní list, nebo začít nový?

Přidáno do košíku

Váš produkt Bezpečnostní list a vše, co jste vyplnili, je nyní v košíku. Přejděte k pokladně a dokončete objednávku, nebo přidávejte další testy — vaše odpovědi zůstanou u této položky.

Přejít k pokladně
Objednat bezpečnostní list
Koncept obnoven
1
Klient
2
Receptura
3
Jazyky
4
Podrobnosti
5
Kontrola

Vyplňte formulář níže. Připravíme vám bezpečnostní list SDS v souladu s REACH s rychlou dodací lhůtou.

I. Informace o klientovi
Klient
Držitel SDS
II. Informace o receptuře produktu
#Název INCIČíslo CAS% v produktu
Celkem0/ 100%

Máte dlouhý seznam složek? Začněte s naší tabulkou.

Stáhněte si šablonu, vyplňte ji v Excelu, Numbers, LibreOffice nebo Tabulkách Google a nahrajte ji sem — každé pole skončí na správném místě. Ruční vyplnění formuláře funguje stejně dobře.

Stáhnout šablonu (.xlsx) nebo .csv
III. Regulační oblast a jazykové verzeSDS musí být dodán v úředním jazyce každého trhu, na který je produkt uváděn. Vyberte každý trh, na kterém distribuujete — za každou volbu vystavíme jednu jazykovou verzi.
0 vybráno
IV. Další informace o produktuVše v tomto kroku je volitelné, ale čím více nám sdělíte, tím rychleji můžeme SDS dokončit.
V. Zkontrolujte svou objednávku
Již od—
Údaje objednávky

Vše, co jste pro tuto položku vyplnili.

Jak to funguje

Dvě cesty k připravenosti na trh — zvolte tu, která Vám vyhovuje.

Vím, co potřebuji

Vyberte testy a dokončete objednávku

1 Přidejte testy do košíku a přejděte do pokladny
2 Zajistíme bezplatné vyzvednutí Vašich vzorků DHL
3 Otestujeme je a Vy získáte výsledky
Objednat testy & CPSR

Nejsem si jistý/á, co potřebuji

Přidejte údaje o produktu a získejte doporučení

1 Přihlaste se a přidejte údaje o produktu, abyste viděli, co potřebujete
2 Objednejte potřebné testy — vyzvednutí zajistíme my
3 Výsledky obdržíte po dokončení testů
Začít
Stále si nejste jistí? Vyplňte dotazník