Sepetiniz

Kargo / teslim alma her siparişe dahildir.
Sepetiniz boş
Başlamak için bir test ekleyin
Testlere göz atın
Cosmetic Testing Lab

State Cosmetics Laws: PFAS Bans in WA, MN, ME, NY and More

Kasım 21, 2026  ·  7 dk okuma

State Cosmetics Laws: PFAS Bans in WA, MN, ME, NY and More

California gets the attention, but state cosmetics laws on PFAS and other chemicals now reach well beyond it. Washington, Minnesota, Maine, Colorado, Maryland and Vermont have their own bans, with different scopes, dates and penalties, and New York is a state to watch. If you sell nationally, you need one compliance check that covers all of them. This guide compares the laws that matter most and shows how to build that check.

İçindekiler
  1. The short answer
  2. Why a state-by-state view matters
  3. Washington: the Toxic-Free Cosmetics Act (HB 1047)
  4. Minnesota: Amara’s Law
  5. Maine, Vermont and Colorado
  6. New York and other watch-list states
  7. Intentionally added versus trace PFAS
  8. Why the SDS will not settle this
  9. Build a multi-state compliance matrix
  10. Reformulating without breaking the product
  11. Common mistakes
  12. Frequently asked questions
  13. Key takeaways

The short answer

Several states ban intentionally added PFAS in cosmetics, namely Colorado, Maryland, Minnesota and Washington since 1 January 2025, and Maine and Vermont since 1 January 2026, while Washington also bans phthalates, formaldehyde, lead and other chemicals and Minnesota adds a PFAS reporting duty. New York has no enacted cosmetics ban that we could confirm; a bill is pending. The patchwork changes often, so this article is general information, not legal advice. Verify each date on the official pages in the sources before you rely on it.

Why a state-by-state view matters

The federal law, MoCRA, regulates facility registration, product listing and safety substantiation, but it does not set a national ingredient ban list. States have filled the gap. Because most brands ship nationwide, the strictest state in effect decides the formula. Marketplaces and retailers also ask for declarations that cover all states. If you already compared the EU and US approaches, you know the EU prohibited-ingredient list is long and centrally managed; in the US you have a growing set of local lists. Our guide to the CPSR shows how an EU safety assessment screens each ingredient, a habit worth copying for US state checks.

Şunu da okuyun AB Kozmetik Tüzüğü 1223/2009 Sade Bir Dille

Washington: the Toxic-Free Cosmetics Act (HB 1047)

Washington’s law, signed in May 2023, has the broadest ingredient list outside California. From 1 January 2025, it bans intentionally added:

  • PFAS
  • ortho-phthalates
  • formaldehyde and methylene glycol
  • mercury and mercury compounds
  • triclosan
  • m-phenylenediamine and o-phenylenediamine and their salts
  • lead and lead compounds (and lead at or above 1 ppm)

The law also lets the Department of Ecology restrict formaldehyde-releasing chemicals by rule, an initial set from 2026 and the rest from 2027 at the earliest. Retailers could sell existing stock until 1 January 2026, but that allowance did not extend to manufacturers. Manufacturers that produce, import or distribute non-compliant products face civil penalties per violation, with higher penalties for repeat offences. Check the session law text for the exact figures.

Minnesota: Amara’s Law

Minnesota Statute 116.943 prohibits selling, offering or distributing cosmetics with intentionally added PFAS, effective 1 January 2025. It covers 10 other product categories too. A cosmetic is defined as an article, excluding soap, applied to the body to cleanse, beautify or alter appearance, and components count too. Minnesota also created a reporting duty: manufacturers of products with intentionally added PFAS sold in the state must report details such as product description, purpose of the PFAS and amount by CAS number. The initial deadline of 1 January 2026 has been moved more than once (a September 2026 date has been reported), so confirm the current date with the Minnesota Pollution Control Agency. The statute also allows the agency to require test results and a certificate of compliance within 30 days of a request.

Table of US state cosmetics laws: Washington, Minnesota, Colorado, Maryland, Maine, Vermont and New York, with the rule and start date.

Maine, Vermont and Colorado

  • Maine: from 1 January 2026, selling cosmetics with intentionally added PFAS is prohibited. The ban also reaches products sold in a fluorinated container or one containing intentionally added PFAS, so packaging matters. Soap and prescription products are outside the definition.
  • Vermont: reported ban from 1 January 2026 on cosmetics with intentionally added PFAS, with a trace-amount exception for technically unavoidable presence. Confirm against the statute.
  • Colorado: HB 22-1345 prohibits selling or distributing cosmetics with intentionally added PFAS from 1 January 2025.

Maryland also bans a list of chemicals, including 13 named PFAS, in cosmetics from 1 January 2025. Connecticut is reported to phase in a labeling and notice requirement from mid-2026 and a full ban from 2028; verify before planning around it. Other states, such as New Jersey, Oregon and New Hampshire, are reported to be moving as well.

Şunu da okuyun Kozmetik Sorumlu Kişi (RP): Kimin İhtiyacı Var ve Ne Yapar

New York and other watch-list states

New York has enacted PFAS limits for apparel and menstrual products, but when we checked, we could not confirm an enacted cosmetics ban. The Beauty Justice Act, which would cover PFAS and other chemicals in personal care products, was still pending. Treat New York as a watch-list state and check the legislature’s site before shipping decisions.

Intentionally added versus trace PFAS

Most of these laws target intentionally added PFAS, meaning PFAS deliberately included to give the product a function such as water resistance or slip. Trace contamination from raw materials or processing is treated differently, and some laws include trace or unavoidable-use language while others leave it to rulemaking. A supplier’s statement that PFAS are “not intentionally added” is not an analytical result. Laboratory PFAS testing is a specialist field that we do not offer, so ask your supplier or a specialised lab, and keep the results in your file.

Why the SDS will not settle this

A safety data sheet lists classified hazards and ingredients above set thresholds. Many restricted substances, PFAS included, are not hazard-classified and may not appear. Use the SDS for transport, workplace and wholesale questions, and run a separate ingredient screen for state bans.

Şunu da okuyun CPNP Bildirimi: Bir Kozmetik Ürün Nasıl Kaydedilir

Build a multi-state compliance matrix

  1. List every SKU and every state you ship to, including marketplace sales.
  2. Export full ingredient lists with CAS numbers, including fragrance, colour and preservative components.
  3. Screen each ingredient against each state’s list; keep one matrix with ingredient, state, law, date and decision.
  4. Collect supplier declarations that cover PFAS, phthalates, formaldehyde releasers, lead and mercury.
  5. Check packaging: Maine looks at fluorinated containers.
  6. Set reminders for effective dates and review the matrix at least twice a year.
Smear of white cream on a beige surface

Reformulating without breaking the product

Replacing a PFAS ingredient usually means a new silicone, ester or polymer, and replacing a formaldehyde releaser means a new preservative system. Both change how the product behaves. Run stability tests on the new version, and a microbiological test on the finished product. For water-based formulas, a challenge test confirms that the new preservation system works. Batch-to-batch records show regulators and retailers that you acted in good time.

Common mistakes

  • Only following California: Washington adds lead and triclosan, and Maine looks at containers.
  • Trusting old stock: sell-through periods differ, and in Washington the one for retailers did not protect manufacturers.
  • Ignoring reporting laws: a product can be legal to sell but still require a report, as in Minnesota.
  • Relying on a single supplier email: ask for a signed declaration with CAS numbers and a date.
  • Assuming federal preemption: MoCRA has carve-outs that, in our reading of the FDA summary, leave state ingredient bans in place. Confirm with a US lawyer.

Frequently asked questions

Do these laws apply to online sales shipped into the state?

Generally yes. The laws apply to products sold, offered or distributed in the state, which normally includes online orders delivered there. Confirm with counsel for your situation.

Is soap covered?

Several laws, including Minnesota, Maine and Washington, exclude soap from the cosmetic definition, but the wording differs. Check each definition rather than assuming.

Can a CPSR help with US state laws?

A CPSR is an EU document, but its ingredient-by-ingredient review is a good base for US screening, because many state lists copy chemicals already prohibited in the EU. Our CPSR service gives you that file with a signed assessment.

Key takeaways

  • Six or more states ban intentionally added PFAS in cosmetics; Washington also bans phthalates, formaldehyde, lead and more.
  • Minnesota adds a PFAS reporting duty; Maine also reaches fluorinated containers.
  • New York remains pending; keep a watch list and re-check dates.
  • Keep a multi-state matrix, supplier declarations and re-test after any reformulation.
Kaynaklar (6)
Kaynak Yayıncı Bağlantı
Washington Substitute House Bill 1047 (Toxic-Free Cosmetics Act), Session Laws 2023 Washington State Legislature lawfilesext.leg.wa.gov/biennium/2023-24/Htm/Bills/Session%20Laws/House/1047-S.SL.htm
Minnesota Statutes 116.943: Perfluoroalkyl and polyfluoroalkyl substances in products Minnesota Office of the Revisor of Statutes revisor.mn.gov/statutes/cite/116.943
Maine Revised Statutes, Title 38, section 1614: Perfluoroalkyl and polyfluoroalkyl substances Maine Legislature legislature.maine.gov/legis/statutes/38/title38sec1614.html
Colorado House Bill 22-1345 Colorado General Assembly leg.colorado.gov/bills/hb22-1345
Modernization of Cosmetics Regulation Act of 2022 (MoCRA) U.S. Food and Drug Administration fda.gov/cosmetics/cosmetics-laws-regulations/modernization-cosmetics-regulation-act-2022-mocra
State PFAS Bans in Cosmetics Expand Ahead of 2026 Morgan Lewis morganlewis.com/pubs/2025/12/state-pfas-bans-in-cosmetics-expand-ahead-of-2026

Bunları da okuyun

Tüm makaleler →
İlk siparişinizde %10, paketlerde %20 tasarruf edin!
Paket indirimi herkese. %10 için ücretsiz hesap oluşturun ve e-postanızı onaylayın.
Başlayın

Önceki bir CPSR Güvenlik Raporu düzenlensin mi, yoksa yeni bir tane mi başlatılsın?

Sepetinize eklendi

CPSR Güvenlik Raporu ve doldurduğunuz her şey artık sepetinizde. Siparişi tamamlamak için ödemeye geçin ya da test eklemeye devam edin; yanıtlarınız bu kalemde saklı kalır.

Ödemeye geç
CPSR Raporu Sipariş Et
Taslak geri yüklendi
1
Şirket
2
Ürün
3
Ambalaj
4
Formül
5
Testler
6
Ambalaj tasarımı
7
Gözden geçir

Ürün formunu doldurun. Güvenlik değerlendiricilerimiz siparişinizi kısa süre içinde onaylayacaktır.

I. Güvenlik değerlendirmesini sipariş eden kişi / şirket
II. Ürün bilgileri
III. Kullanım koşulları ve ambalaj
IV. Ürün formülü
#INCI adıCAS numarasıNano% üründe
İçerebilir
Toplam0/ 100%
V. Bitmiş ürünün spesifikasyonları ve testleri

Mikrobiyolojik riski düşük olanlar dışındaki tüm kozmetik ürünler için challenge testi gereklidir; bunlar şunlardır:

  • Su içermeyen veya su aktivitesi düşük ürünler
  • pH değeri 3'ün altında veya 10'un üzerinde olan ürünler
  • 20%'den fazla alkol içeren ürünler
  • Düşmanca bir ortam oluşturan hammaddeler içeren ürünler (güçlü oksitleyici maddeler, polar organik çözücüler, oksidatif boyalar, alüminyum klorohidrat ve ilgili tuzlar, itici gazlar vb.)
  • 65 °C üzerinde kaplara doldurulan ürünler
  • Basınçlı kaplarda, pompalı dispenserlerde veya tek dozluk ünitelerde ambalajlanan ürünler
Challenge testi ne zaman gerekmez?

Mikrobiyolojik riski düşük olanlar dışındaki tüm kozmetik ürünler için challenge testi gereklidir; bunlar şunlardır:

  • Su içermeyen veya su aktivitesi düşük ürünler
  • pH değeri 3'ün altında veya 10'un üzerinde olan ürünler
  • 20%'den fazla alkol içeren ürünler
  • Düşmanca bir ortam oluşturan hammaddeler içeren ürünler (güçlü oksitleyici maddeler, polar organik çözücüler, oksidatif boyalar, alüminyum klorohidrat ve ilgili tuzlar, itici gazlar vb.)
  • 65 °C üzerinde kaplara doldurulan ürünler
  • Basınçlı kaplarda, pompalı dispenserlerde veya tek dozluk ünitelerde ambalajlanan ürünler
VI. Ürün ambalajı ve ambalaj tasarımıİsteğe bağlı — etiketi nihai CPSR ile karşılaştırarak kontrol ediyoruz; bu nedenle dış ambalajın ve birincil kabın tasarımı yardımcı olur. Bunu daha sonra da bize gönderebilirsiniz.
VII. Siparişinizi gözden geçirin
Fiyat—

Önceki bir Güvenlik Bilgi Formu düzenlensin mi, yoksa yeni bir tane mi başlatılsın?

Sepetinize eklendi

Güvenlik Bilgi Formu ve doldurduğunuz her şey artık sepetinizde. Siparişi tamamlamak için ödemeye geçin ya da test eklemeye devam edin; yanıtlarınız bu kalemde saklı kalır.

Ödemeye geç
Güvenlik Bilgi Formu Sipariş Et
Taslak geri yüklendi
1
Müşteri
2
Formül
3
Diller
4
Ayrıntılar
5
Gözden geçir

Aşağıdaki formu doldurun. REACH uyumlu SDS'nizi hızlı bir teslim süresiyle hazırlayalım.

I. Müşteri hakkında bilgiler
Müşteri
SDS sahibi
II. Ürün formülü hakkında bilgiler
#INCI adıCAS numarası% üründe
Toplam0/ 100%

Uzun bir bileşen listeniz mi var? Tablomuzla başlayın.

Şablonu indirin, Excel, Numbers, LibreOffice veya Google Sheets'te doldurun ve buraya yükleyin; her alan doğru yere yerleşir. Formu elle doldurmak da aynı derecede iyi çalışır.

Şablonu indir (.xlsx) veya .csv
III. Mevzuat alanı ve dil sürümleriSDS, ürünün piyasaya sunulduğu her pazarın resmi dilinde sağlanmalıdır. Dağıtım yaptığınız her pazarı seçin — seçim başına bir dil sürümü düzenliyoruz.
0 seçildi
IV. Ürün hakkında ek bilgilerBu adımdaki her şey isteğe bağlıdır, ancak ne kadar çok bilgi verirseniz SDS'yi o kadar hızlı tamamlarız.
V. Siparişinizi gözden geçirin
Başlangıç fiyatı—
Sipariş verileri

Bu kalem için doldurduğunuz her şey.

Nasıl çalışır?

Pazara hazır olmanın iki yolu — size uygun olanı seçin.

Neye ihtiyacım olduğunu biliyorum

Testleri seçin ve ödemeye geçin

1 Testleri sepetinize ekleyin ve ödemeye geçin
2 Numunelerinizin ücretsiz DHL alımını biz ayarlarız
3 Test eder, sonuçları size iletiriz
Testleri ve CPSR'yi Sipariş Verin

Neye ihtiyacım olduğundan emin değilim

Ürün bilgilerini ekleyin ve öneriler alın

1 Giriş yapın ve neye ihtiyacınız olduğunu görmek için ürün bilgilerini ekleyin
2 Gerekli testleri sipariş edin — alımı biz ayarlarız
3 Testler bittikten sonra sonuçlarınızı alırsınız
Başlayın
Hâlâ emin değil misiniz? Anketi yanıtlayın