Il Suo carrello

Spedizione / ritiro sono sempre inclusi in ogni ordine.
Il Suo carrello è vuoto
Aggiunga un test per iniziare
Sfoglia i test
Cosmetic Testing Lab

State Cosmetics Laws: PFAS Bans in WA, MN, ME, NY and More

Novembre 21, 2026  ·  7 min di lettura

State Cosmetics Laws: PFAS Bans in WA, MN, ME, NY and More

California gets the attention, but state cosmetics laws on PFAS and other chemicals now reach well beyond it. Washington, Minnesota, Maine, Colorado, Maryland and Vermont have their own bans, with different scopes, dates and penalties, and New York is a state to watch. If you sell nationally, you need one compliance check that covers all of them. This guide compares the laws that matter most and shows how to build that check.

Indice
  1. The short answer
  2. Why a state-by-state view matters
  3. Washington: the Toxic-Free Cosmetics Act (HB 1047)
  4. Minnesota: Amara’s Law
  5. Maine, Vermont and Colorado
  6. New York and other watch-list states
  7. Intentionally added versus trace PFAS
  8. Why the SDS will not settle this
  9. Build a multi-state compliance matrix
  10. Reformulating without breaking the product
  11. Common mistakes
  12. Frequently asked questions
  13. Key takeaways

The short answer

Several states ban intentionally added PFAS in cosmetics, namely Colorado, Maryland, Minnesota and Washington since 1 January 2025, and Maine and Vermont since 1 January 2026, while Washington also bans phthalates, formaldehyde, lead and other chemicals and Minnesota adds a PFAS reporting duty. New York has no enacted cosmetics ban that we could confirm; a bill is pending. The patchwork changes often, so this article is general information, not legal advice. Verify each date on the official pages in the sources before you rely on it.

Why a state-by-state view matters

The federal law, MoCRA, regulates facility registration, product listing and safety substantiation, but it does not set a national ingredient ban list. States have filled the gap. Because most brands ship nationwide, the strictest state in effect decides the formula. Marketplaces and retailers also ask for declarations that cover all states. If you already compared the EU and US approaches, you know the EU prohibited-ingredient list is long and centrally managed; in the US you have a growing set of local lists. Our guide to the CPSR shows how an EU safety assessment screens each ingredient, a habit worth copying for US state checks.

Leggi anche Regolamento UE sui cosmetici 1223/2009 spiegato semplice

Washington: the Toxic-Free Cosmetics Act (HB 1047)

Washington’s law, signed in May 2023, has the broadest ingredient list outside California. From 1 January 2025, it bans intentionally added:

  • PFAS
  • ortho-phthalates
  • formaldehyde and methylene glycol
  • mercury and mercury compounds
  • triclosan
  • m-phenylenediamine and o-phenylenediamine and their salts
  • lead and lead compounds (and lead at or above 1 ppm)

The law also lets the Department of Ecology restrict formaldehyde-releasing chemicals by rule, an initial set from 2026 and the rest from 2027 at the earliest. Retailers could sell existing stock until 1 January 2026, but that allowance did not extend to manufacturers. Manufacturers that produce, import or distribute non-compliant products face civil penalties per violation, with higher penalties for repeat offences. Check the session law text for the exact figures.

Minnesota: Amara’s Law

Minnesota Statute 116.943 prohibits selling, offering or distributing cosmetics with intentionally added PFAS, effective 1 January 2025. It covers 10 other product categories too. A cosmetic is defined as an article, excluding soap, applied to the body to cleanse, beautify or alter appearance, and components count too. Minnesota also created a reporting duty: manufacturers of products with intentionally added PFAS sold in the state must report details such as product description, purpose of the PFAS and amount by CAS number. The initial deadline of 1 January 2026 has been moved more than once (a September 2026 date has been reported), so confirm the current date with the Minnesota Pollution Control Agency. The statute also allows the agency to require test results and a certificate of compliance within 30 days of a request.

Table of US state cosmetics laws: Washington, Minnesota, Colorado, Maryland, Maine, Vermont and New York, with the rule and start date.

Maine, Vermont and Colorado

  • Maine: from 1 January 2026, selling cosmetics with intentionally added PFAS is prohibited. The ban also reaches products sold in a fluorinated container or one containing intentionally added PFAS, so packaging matters. Soap and prescription products are outside the definition.
  • Vermont: reported ban from 1 January 2026 on cosmetics with intentionally added PFAS, with a trace-amount exception for technically unavoidable presence. Confirm against the statute.
  • Colorado: HB 22-1345 prohibits selling or distributing cosmetics with intentionally added PFAS from 1 January 2025.

Maryland also bans a list of chemicals, including 13 named PFAS, in cosmetics from 1 January 2025. Connecticut is reported to phase in a labeling and notice requirement from mid-2026 and a full ban from 2028; verify before planning around it. Other states, such as New Jersey, Oregon and New Hampshire, are reported to be moving as well.

Leggi anche Persona responsabile cosmetici (RP): chi ne ha bisogno e cosa fa

New York and other watch-list states

New York has enacted PFAS limits for apparel and menstrual products, but when we checked, we could not confirm an enacted cosmetics ban. The Beauty Justice Act, which would cover PFAS and other chemicals in personal care products, was still pending. Treat New York as a watch-list state and check the legislature’s site before shipping decisions.

Intentionally added versus trace PFAS

Most of these laws target intentionally added PFAS, meaning PFAS deliberately included to give the product a function such as water resistance or slip. Trace contamination from raw materials or processing is treated differently, and some laws include trace or unavoidable-use language while others leave it to rulemaking. A supplier’s statement that PFAS are “not intentionally added” is not an analytical result. Laboratory PFAS testing is a specialist field that we do not offer, so ask your supplier or a specialised lab, and keep the results in your file.

Why the SDS will not settle this

A safety data sheet lists classified hazards and ingredients above set thresholds. Many restricted substances, PFAS included, are not hazard-classified and may not appear. Use the SDS for transport, workplace and wholesale questions, and run a separate ingredient screen for state bans.

Leggi anche Notifica CPNP: come registrare un prodotto cosmetico

Build a multi-state compliance matrix

  1. List every SKU and every state you ship to, including marketplace sales.
  2. Export full ingredient lists with CAS numbers, including fragrance, colour and preservative components.
  3. Screen each ingredient against each state’s list; keep one matrix with ingredient, state, law, date and decision.
  4. Collect supplier declarations that cover PFAS, phthalates, formaldehyde releasers, lead and mercury.
  5. Check packaging: Maine looks at fluorinated containers.
  6. Set reminders for effective dates and review the matrix at least twice a year.
Smear of white cream on a beige surface

Reformulating without breaking the product

Replacing a PFAS ingredient usually means a new silicone, ester or polymer, and replacing a formaldehyde releaser means a new preservative system. Both change how the product behaves. Run stability tests on the new version, and a microbiological test on the finished product. For water-based formulas, a challenge test confirms that the new preservation system works. Batch-to-batch records show regulators and retailers that you acted in good time.

Common mistakes

  • Only following California: Washington adds lead and triclosan, and Maine looks at containers.
  • Trusting old stock: sell-through periods differ, and in Washington the one for retailers did not protect manufacturers.
  • Ignoring reporting laws: a product can be legal to sell but still require a report, as in Minnesota.
  • Relying on a single supplier email: ask for a signed declaration with CAS numbers and a date.
  • Assuming federal preemption: MoCRA has carve-outs that, in our reading of the FDA summary, leave state ingredient bans in place. Confirm with a US lawyer.

Frequently asked questions

Do these laws apply to online sales shipped into the state?

Generally yes. The laws apply to products sold, offered or distributed in the state, which normally includes online orders delivered there. Confirm with counsel for your situation.

Is soap covered?

Several laws, including Minnesota, Maine and Washington, exclude soap from the cosmetic definition, but the wording differs. Check each definition rather than assuming.

Can a CPSR help with US state laws?

A CPSR is an EU document, but its ingredient-by-ingredient review is a good base for US screening, because many state lists copy chemicals already prohibited in the EU. Our CPSR service gives you that file with a signed assessment.

Key takeaways

  • Six or more states ban intentionally added PFAS in cosmetics; Washington also bans phthalates, formaldehyde, lead and more.
  • Minnesota adds a PFAS reporting duty; Maine also reaches fluorinated containers.
  • New York remains pending; keep a watch list and re-check dates.
  • Keep a multi-state matrix, supplier declarations and re-test after any reformulation.
Fonti (6)
Fonte Editore Link
Washington Substitute House Bill 1047 (Toxic-Free Cosmetics Act), Session Laws 2023 Washington State Legislature lawfilesext.leg.wa.gov/biennium/2023-24/Htm/Bills/Session%20Laws/House/1047-S.SL.htm
Minnesota Statutes 116.943: Perfluoroalkyl and polyfluoroalkyl substances in products Minnesota Office of the Revisor of Statutes revisor.mn.gov/statutes/cite/116.943
Maine Revised Statutes, Title 38, section 1614: Perfluoroalkyl and polyfluoroalkyl substances Maine Legislature legislature.maine.gov/legis/statutes/38/title38sec1614.html
Colorado House Bill 22-1345 Colorado General Assembly leg.colorado.gov/bills/hb22-1345
Modernization of Cosmetics Regulation Act of 2022 (MoCRA) U.S. Food and Drug Administration fda.gov/cosmetics/cosmetics-laws-regulations/modernization-cosmetics-regulation-act-2022-mocra
State PFAS Bans in Cosmetics Expand Ahead of 2026 Morgan Lewis morganlewis.com/pubs/2025/12/state-pfas-bans-in-cosmetics-expand-ahead-of-2026
Risparmi il 10% sul primo ordine e il 20% sui bundle!
Sconto sui pacchetti per tutti. Per il 10%, crea un account gratuito e conferma la tua email.
Inizia

Rapporto di sicurezza CPSR: modificare un documento precedente o iniziarne uno nuovo?

Aggiunto al carrello

Il Suo Rapporto di sicurezza CPSR e tutto ciò che ha compilato sono ora nel carrello. Vada al checkout per completare l'ordine, oppure continui ad aggiungere test: le Sue risposte restano associate a questo articolo.

Vai al checkout
Ordina il report CPSR
Bozza ripristinata
1
Azienda
2
Prodotto
3
Imballaggio
4
Formula
5
Test
6
Grafica
7
Riepilogo

Compili il modulo del prodotto. I nostri valutatori della sicurezza confermeranno a breve il Suo ordine.

I. Persona / azienda che ordina la valutazione della sicurezza
II. Informazioni sul prodotto
III. Condizioni d'uso e imballaggio
IV. Formula del prodotto
#Denominazione INCINumero CASNano% nel prodotto
Può contenere
Totale0/ 100%
V. Specifiche e test del prodotto finito

Il challenge test è richiesto per ogni prodotto cosmetico, tranne quelli a basso rischio microbiologico, che sono:

  • Prodotti che non contengono acqua o hanno una bassa attività dell'acqua
  • Prodotti con pH inferiore a 3 o superiore a 10
  • Prodotti con più del 20% di alcol
  • Prodotti contenenti materie prime che creano un ambiente ostile (forti agenti ossidanti, solventi organici polari, coloranti ossidanti, alluminio cloridrato e sali correlati, gas propellenti e così via)
  • Prodotti riempiti in contenitori a più di 65 °C
  • Prodotti confezionati in contenitori pressurizzati, erogatori a pompa o unità monodose
Quando il challenge test non è richiesto?

Il challenge test è richiesto per ogni prodotto cosmetico, tranne quelli a basso rischio microbiologico, che sono:

  • Prodotti che non contengono acqua o hanno una bassa attività dell'acqua
  • Prodotti con pH inferiore a 3 o superiore a 10
  • Prodotti con più del 20% di alcol
  • Prodotti contenenti materie prime che creano un ambiente ostile (forti agenti ossidanti, solventi organici polari, coloranti ossidanti, alluminio cloridrato e sali correlati, gas propellenti e così via)
  • Prodotti riempiti in contenitori a più di 65 °C
  • Prodotti confezionati in contenitori pressurizzati, erogatori a pompa o unità monodose
VI. Imballaggio e grafica del prodottoFacoltativo — controlliamo l'etichetta rispetto al CPSR finale, quindi la grafica dell'imballaggio esterno e del contenitore primario è utile. Può anche inviarcela in un secondo momento.
VII. Riepilogo del Suo ordine
Prezzo—

Scheda di dati di sicurezza: modificare un documento precedente o iniziarne uno nuovo?

Aggiunto al carrello

Il Suo Scheda di dati di sicurezza e tutto ciò che ha compilato sono ora nel carrello. Vada al checkout per completare l'ordine, oppure continui ad aggiungere test: le Sue risposte restano associate a questo articolo.

Vai al checkout
Ordina la scheda di dati di sicurezza
Bozza ripristinata
1
Cliente
2
Formula
3
Lingue
4
Dettagli
5
Riepilogo

Compili il modulo qui sotto. Prepareremo la Sua SDS conforme a REACH con tempi di consegna rapidi.

I. Informazioni sul cliente
Il cliente
Titolare della SDS
II. Informazioni sulla formula del prodotto
#Denominazione INCINumero CAS% nel prodotto
Totale0/ 100%

Ha un lungo elenco di ingredienti? Parta dal nostro foglio di calcolo.

Scarichi il modello, lo compili in Excel, Numbers, LibreOffice o Google Sheets, poi lo carichi qui: ogni campo finisce al posto giusto. Compilare il modulo a mano funziona altrettanto bene.

Scarica il modello (.xlsx) o .csv
III. Area normativa e versioni linguisticheUna SDS deve essere fornita nella lingua ufficiale di ogni mercato in cui il prodotto è immesso. Scelga ogni mercato in cui distribuisce — emettiamo una versione linguistica per ogni selezione.
0 selezionati
IV. Informazioni aggiuntive sul prodottoTutto in questo passaggio è facoltativo, ma più informazioni ci fornisce, più rapidamente potremo finalizzare la SDS.
V. Riepilogo del Suo ordine
A partire da—
Dati dell'ordine

Tutto ciò che ha compilato per questo articolo.

Come funziona

Due modi per essere pronti per il mercato — scelga quello che fa per Lei.

So cosa mi serve

Scelga i test & vada al checkout

1 Aggiunga i test al carrello & vada al checkout
2 Organizziamo noi il ritiro gratuito dei Suoi campioni con DHL
3 Li testiamo e Lei riceve i risultati
Ordina test e CPSR

Non so cosa mi serve

Aggiunga le informazioni sul prodotto & riceva consigli

1 Acceda & aggiunga le informazioni sul prodotto per vedere cosa Le serve
2 Ordini i test necessari — organizziamo noi il ritiro
3 Riceve i risultati al termine dei test
Inizia
Ancora indeciso? Risponda al questionario