Váš košík

Doprava / vyzvednutí je vždy zahrnuta v každé objednávce.
Váš košík je prázdný
Přidejte test a začněte
Procházet testy
Cosmetic Testing Lab

Selling US Cosmetics in the UK: SCPN, Responsible Person, Safety Report

21 listopadu, 2026  ·  8 min čtení

Selling US Cosmetics in the UK: SCPN, Responsible Person, Safety Report

If you want to sell US cosmetics in the UK, your FDA compliance and MoCRA listings do not cover you. Great Britain has its own cosmetics regulation, its own notification service and its own requirement for a Responsible Person with a UK address. The good news for US brands is that much of the technical work, such as formulas, stability and microbiology data, can be reused. This guide explains what is new, what you can carry over and what to prepare first.

Obsah
  1. The short answer
  2. What is different from the US system?
  3. Step 1: Appoint a UK Responsible Person
  4. Step 2: Get a UK-ready safety report
  5. Step 3: Build the PIF in English
  6. Step 4: Generate the data behind the report
  7. Step 5: Notify through the SCPN service
  8. Step 6: Convert the label
  9. What about Northern Ireland and the EU?
  10. Common mistakes US brands make
  11. Frequently asked questions
  12. Key takeaways

The short answer

To place a cosmetic on the market in Great Britain, a US brand needs a UK Responsible Person with a genuine UK address, a product safety report (the UK equivalent of the CPSR) signed by a qualified safety assessor, a product information file (PIF) kept in English, a notification through the UK’s Submit cosmetic product notifications service (SCPN) before the product is made available, and a label that carries the Responsible Person’s details. MoCRA facility registration and product listing with FDA are separate and do not replace any of these steps. If you also sell in Northern Ireland or the EU, different rules apply there, as explained below.

What is different from the US system?

In the US, cosmetics are not approved before sale. MoCRA added facility registration, product listing, safety substantiation and adverse event reporting, but FDA does not issue a license for each product. Great Britain is also a self-declaration system, with no approval of products, but it is more document-driven: the Responsible Person must hold a signed safety assessment and a full PIF before the first sale, and must notify the product to the authorities (the Office for Product Safety and Standards, OPSS).

  • Safety substantiation: MoCRA requires adequate substantiation of safety, but the UK expects a formal, structured safety report with a named assessor and qualifications.
  • Responsible Person: MoCRA has a “responsible person” (the manufacturer, packer or distributor named on the label), who does not need to be in the UK. The UK Responsible Person must be established in the UK.
  • Ingredient lists: The UK has its own lists of prohibited and restricted substances, colourants, preservatives and UV filters, which differ from FDA rules on color additives and prohibited ingredients.

Čtěte také Britské předpisy o kosmetice: SCPN a britská odpovědná osoba

Step 1: Appoint a UK Responsible Person

The Responsible Person can be a business or an individual, and must have a UK address. According to the UK government guidance, a UK established address does not include mail-forwarding or PO box addresses. For a brand outside the UK, the options are an importer into the UK, or a company or person that you name in writing and who accepts the role. The Responsible Person is legally accountable for the product’s compliance, so choose a party that actually reviews your documents rather than a name on a label.

Six steps for a US cosmetic brand to enter the UK market, from Responsible Person to SCPN notification and label.

Step 2: Get a UK-ready safety report

Before the product is made available, a qualified safety assessor must evaluate it. The UK guidance describes the assessor as a qualified professional, for example someone with a university degree in pharmacy, toxicology, medicine or a similar discipline, and Part B of the report must include the assessor’s name, address and proof of qualifications. Because requirements and acceptance of qualifications can differ between the UK and the EU, ask your assessor to confirm that the report meets the UK regulation, not only the EU one. A CPSR with Part A (safety information) and Part B (safety assessment) is the usual route, and many brands use one report prepared to satisfy both the UK and the EU.

A US safety substantiation summary, or a MoCRA file, is a useful start but rarely has the structure the report needs: formula with concentrations, physical and chemical properties, microbiological quality, impurities, exposure and toxicological profile of each ingredient, and undesirable effects.

Step 3: Build the PIF in English

The PIF must be kept in English for all products, and it should be held for 10 years after the last batch is made available. It typically contains the product description, the product safety report, evidence of good manufacturing practice (ISO 22716 is a recognized way to show this, though not the only one) and evidence for any claimed effects. If your manufacturer already works to FDA cosmetic GMP expectations, use that as supporting material, but check that it demonstrates the same points.

Čtěte také Prodej kosmetiky v Turecku: odpovědná osoba a oznámení ÜTS

Step 4: Generate the data behind the report

The safety assessor needs data on the finished product. Typically this means:

Data produced for the US market is often reusable, if it was generated on the final formula and packaging with a recognized method. Check dates, batch and packaging match what you will sell.

Person loading boxes into a delivery van

Step 5: Notify through the SCPN service

The Responsible Person must submit the product details through the Submit cosmetic product notifications service before the product is made available in Great Britain. The notification typically includes the product name and category, the Responsible Person’s details, the country of origin for imports, the formulation and, where relevant, nanomaterials. Nanomaterials not covered by the relevant annexes need a separate nanomaterial notification. Serious undesirable effects must be reported to OPSS without delay.

Step 6: Convert the label

A US label usually needs changes before it can be used in the UK. The UK guidance lists these items on the container and packaging:

  1. the Responsible Person’s name and address;
  2. the country of origin, if the product is imported;
  3. the weight or volume (not always required for very small contents, under 5 g or 5 ml);
  4. a use-until date;
  5. precautions for use;
  6. an identification number, such as a batch number;
  7. what the product does;
  8. the ingredients, which may appear on the packaging only, with “(nano)” after nanomaterials.

US-specific elements such as Drug Facts panels, or “Distributed by” lines that do not show a UK address, should be replaced or supplemented.

Čtěte také Odpovědná osoba pro kosmetiku (RP): kdo ji potřebuje

What about Northern Ireland and the EU?

The guidance for Great Britain does not cover Northern Ireland, where the Responsible Person must be established in Northern Ireland or the EU, and the EU system applies. A product sold in both GB and the EU therefore usually needs a UK Responsible Person plus an EU Responsible Person, a SCPN notification plus a CPNP notification, and a label with both addresses. A single well-prepared safety report can usually serve both markets. Read more in our guide to the UK and EU CPSR.

Common mistakes US brands make

  • Using a mail-forwarding address as the UK address.
  • Selling on UK marketplaces before the SCPN notification is complete.
  • Keeping the PIF only in the original language of the manufacturer.
  • Assuming an FDA-compliant ingredient or colorant is automatically allowed in the UK.
  • Making disease claims that turn a cosmetic into a medicine in the UK.

Frequently asked questions

Does a US brand need a UK Responsible Person?

Yes. A product made available in Great Britain needs a Responsible Person with a UK address, who can be an importer or a company or person you appoint.

Can I use my EU CPSR in the UK?

Often the technical content can be reused, but the report should be checked against the UK regulation and the assessor’s qualifications confirmed for the UK. Ask your assessor to confirm both.

Is there an approval process for cosmetics in the UK?

No. There is no product approval, but notification through the SCPN service is required before the product is made available.

Key takeaways

  • FDA compliance and MoCRA listing do not replace UK requirements: you need a UK Responsible Person, a PIF in English and an SCPN notification.
  • A signed safety report from a qualified assessor must exist before the first sale.
  • Stability, microbiology and challenge test data are mostly reusable if produced on the final product.
  • If you also sell in the EU or Northern Ireland, plan for the EU Responsible Person and CPNP as well.
Zdroje (5)
Zdroj Vydavatel Odkaz
Making cosmetic products available to consumers in Great Britain GOV.UK gov.uk/guidance/making-cosmetic-products-available-to-consumers-in-great-britain
Cosmetic Products Enforcement Regulations 2013 and Regulation (EC) 1223/2009 (Northern Ireland) GOV.UK (OPSS) gov.uk/government/publications/cosmetic-products-enforcement-regulations-2013/regulation-20091223-and-the-cosmetic-products-enforcement-regulations-2013-northern-ireland
Regulation (EC) No 1223/2009 as retained in UK law (Annex I, safety report) legislation.gov.uk legislation.gov.uk/eur/2009/1223/annex/I/2022-10-15
Modernization of Cosmetics Regulation Act of 2022 (MoCRA) U.S. Food and Drug Administration fda.gov/cosmetics/cosmetics-laws-regulations/modernization-cosmetics-regulation-act-2022-mocra
ISO 22716:2007 Cosmetics: Good Manufacturing Practices ISO iso.org/standard/36437.html

Přečtěte si také

Všechny články →
Ušetřete 10 % na první objednávce a 20 % na balíčcích!
Sleva na balíčky pro všechny. Pro 10 % si vytvořte bezplatný účet a potvrďte e-mail.
Začít

Upravit předchozí dokument Zpráva o bezpečnosti CPSR, nebo začít nový?

Přidáno do košíku

Váš produkt Zpráva o bezpečnosti CPSR a vše, co jste vyplnili, je nyní v košíku. Přejděte k pokladně a dokončete objednávku, nebo přidávejte další testy — vaše odpovědi zůstanou u této položky.

Přejít k pokladně
Objednat zprávu CPSR
Koncept obnoven
1
Společnost
2
Produkt
3
Obal
4
Receptura
5
Testy
6
Grafika
7
Kontrola

Vyplňte formulář produktu. Naši posuzovatelé bezpečnosti vaši objednávku brzy potvrdí.

I. Osoba / společnost objednávající posouzení bezpečnosti
II. Informace o produktu
III. Podmínky použití a obal
IV. Receptura produktu
#Název INCIČíslo CASNano% v produktu
Může obsahovat
Celkem0/ 100%
V. Specifikace a testy hotového produktu

Zátěžový test je vyžadován u každého kosmetického přípravku s výjimkou mikrobiologicky nízkorizikových, což jsou:

  • Přípravky, které neobsahují vodu nebo mají nízkou aktivitu vody
  • Produkty s pH pod 3 nebo nad 10
  • Produkty obsahující více než 20 % alkoholu
  • Přípravky obsahující suroviny, které vytvářejí nepřátelské prostředí (silná oxidační činidla, polární organická rozpouštědla, oxidační barviva, chlorhydrát hliníku a příbuzné soli, hnací plyny apod.)
  • Přípravky plněné do obalů při teplotě nad 65 °C
  • Přípravky balené v tlakových nádobách, pumpových dávkovačích nebo jednodávkových obalech
Kdy zátěžový test není vyžadován?

Zátěžový test je vyžadován u každého kosmetického přípravku s výjimkou mikrobiologicky nízkorizikových, což jsou:

  • Přípravky, které neobsahují vodu nebo mají nízkou aktivitu vody
  • Produkty s pH pod 3 nebo nad 10
  • Produkty obsahující více než 20 % alkoholu
  • Přípravky obsahující suroviny, které vytvářejí nepřátelské prostředí (silná oxidační činidla, polární organická rozpouštědla, oxidační barviva, chlorhydrát hliníku a příbuzné soli, hnací plyny apod.)
  • Přípravky plněné do obalů při teplotě nad 65 °C
  • Přípravky balené v tlakových nádobách, pumpových dávkovačích nebo jednodávkových obalech
VI. Obal a grafika produktuVolitelné — etiketu kontrolujeme oproti hotové CPSR, takže pomůže grafika vnějšího obalu a primární nádoby. Můžete nám ji poslat i později.
VII. Zkontrolujte svou objednávku
Cena—

Upravit předchozí dokument Bezpečnostní list, nebo začít nový?

Přidáno do košíku

Váš produkt Bezpečnostní list a vše, co jste vyplnili, je nyní v košíku. Přejděte k pokladně a dokončete objednávku, nebo přidávejte další testy — vaše odpovědi zůstanou u této položky.

Přejít k pokladně
Objednat bezpečnostní list
Koncept obnoven
1
Klient
2
Receptura
3
Jazyky
4
Podrobnosti
5
Kontrola

Vyplňte formulář níže. Připravíme vám bezpečnostní list SDS v souladu s REACH s rychlou dodací lhůtou.

I. Informace o klientovi
Klient
Držitel SDS
II. Informace o receptuře produktu
#Název INCIČíslo CAS% v produktu
Celkem0/ 100%

Máte dlouhý seznam složek? Začněte s naší tabulkou.

Stáhněte si šablonu, vyplňte ji v Excelu, Numbers, LibreOffice nebo Tabulkách Google a nahrajte ji sem — každé pole skončí na správném místě. Ruční vyplnění formuláře funguje stejně dobře.

Stáhnout šablonu (.xlsx) nebo .csv
III. Regulační oblast a jazykové verzeSDS musí být dodán v úředním jazyce každého trhu, na který je produkt uváděn. Vyberte každý trh, na kterém distribuujete — za každou volbu vystavíme jednu jazykovou verzi.
0 vybráno
IV. Další informace o produktuVše v tomto kroku je volitelné, ale čím více nám sdělíte, tím rychleji můžeme SDS dokončit.
V. Zkontrolujte svou objednávku
Již od—
Údaje objednávky

Vše, co jste pro tuto položku vyplnili.

Jak to funguje

Dvě cesty k připravenosti na trh — zvolte tu, která Vám vyhovuje.

Vím, co potřebuji

Vyberte testy a dokončete objednávku

1 Přidejte testy do košíku a přejděte do pokladny
2 Zajistíme bezplatné vyzvednutí Vašich vzorků DHL
3 Otestujeme je a Vy získáte výsledky
Objednat testy & CPSR

Nejsem si jistý/á, co potřebuji

Přidejte údaje o produktu a získejte doporučení

1 Přihlaste se a přidejte údaje o produktu, abyste viděli, co potřebujete
2 Objednejte potřebné testy — vyzvednutí zajistíme my
3 Výsledky obdržíte po dokončení testů
Začít
Stále si nejste jistí? Vyplňte dotazník