您的购物车

每个订单均已包含运输/取件费用。
您的购物车是空的
添加检测即可开始
浏览测试
Cosmetic Testing Lab

Selling US Cosmetics in the UK: SCPN, Responsible Person, Safety Report

21 11 月, 2026  ·  阅读约 8 分钟

Selling US Cosmetics in the UK: SCPN, Responsible Person, Safety Report

If you want to sell US cosmetics in the UK, your FDA compliance and MoCRA listings do not cover you. Great Britain has its own cosmetics regulation, its own notification service and its own requirement for a Responsible Person with a UK address. The good news for US brands is that much of the technical work, such as formulas, stability and microbiology data, can be reused. This guide explains what is new, what you can carry over and what to prepare first.

目录
  1. The short answer
  2. What is different from the US system?
  3. Step 1: Appoint a UK Responsible Person
  4. Step 2: Get a UK-ready safety report
  5. Step 3: Build the PIF in English
  6. Step 4: Generate the data behind the report
  7. Step 5: Notify through the SCPN service
  8. Step 6: Convert the label
  9. What about Northern Ireland and the EU?
  10. Common mistakes US brands make
  11. Frequently asked questions
  12. Key takeaways

The short answer

To place a cosmetic on the market in Great Britain, a US brand needs a UK Responsible Person with a genuine UK address, a product safety report (the UK equivalent of the CPSR) signed by a qualified safety assessor, a product information file (PIF) kept in English, a notification through the UK’s Submit cosmetic product notifications service (SCPN) before the product is made available, and a label that carries the Responsible Person’s details. MoCRA facility registration and product listing with FDA are separate and do not replace any of these steps. If you also sell in Northern Ireland or the EU, different rules apply there, as explained below.

What is different from the US system?

In the US, cosmetics are not approved before sale. MoCRA added facility registration, product listing, safety substantiation and adverse event reporting, but FDA does not issue a license for each product. Great Britain is also a self-declaration system, with no approval of products, but it is more document-driven: the Responsible Person must hold a signed safety assessment and a full PIF before the first sale, and must notify the product to the authorities (the Office for Product Safety and Standards, OPSS).

  • Safety substantiation: MoCRA requires adequate substantiation of safety, but the UK expects a formal, structured safety report with a named assessor and qualifications.
  • Responsible Person: MoCRA has a “responsible person” (the manufacturer, packer or distributor named on the label), who does not need to be in the UK. The UK Responsible Person must be established in the UK.
  • Ingredient lists: The UK has its own lists of prohibited and restricted substances, colourants, preservatives and UV filters, which differ from FDA rules on color additives and prohibited ingredients.

延伸阅读 英国化妆品法规:SCPN 与英国责任人

Step 1: Appoint a UK Responsible Person

The Responsible Person can be a business or an individual, and must have a UK address. According to the UK government guidance, a UK established address does not include mail-forwarding or PO box addresses. For a brand outside the UK, the options are an importer into the UK, or a company or person that you name in writing and who accepts the role. The Responsible Person is legally accountable for the product’s compliance, so choose a party that actually reviews your documents rather than a name on a label.

Six steps for a US cosmetic brand to enter the UK market, from Responsible Person to SCPN notification and label.

Step 2: Get a UK-ready safety report

Before the product is made available, a qualified safety assessor must evaluate it. The UK guidance describes the assessor as a qualified professional, for example someone with a university degree in pharmacy, toxicology, medicine or a similar discipline, and Part B of the report must include the assessor’s name, address and proof of qualifications. Because requirements and acceptance of qualifications can differ between the UK and the EU, ask your assessor to confirm that the report meets the UK regulation, not only the EU one. A CPSR with Part A (safety information) and Part B (safety assessment) is the usual route, and many brands use one report prepared to satisfy both the UK and the EU.

A US safety substantiation summary, or a MoCRA file, is a useful start but rarely has the structure the report needs: formula with concentrations, physical and chemical properties, microbiological quality, impurities, exposure and toxicological profile of each ingredient, and undesirable effects.

Step 3: Build the PIF in English

The PIF must be kept in English for all products, and it should be held for 10 years after the last batch is made available. It typically contains the product description, the product safety report, evidence of good manufacturing practice (ISO 22716 is a recognized way to show this, though not the only one) and evidence for any claimed effects. If your manufacturer already works to FDA cosmetic GMP expectations, use that as supporting material, but check that it demonstrates the same points.

延伸阅读 在土耳其销售化妆品:责任人与ÜTS通报

Step 4: Generate the data behind the report

The safety assessor needs data on the finished product. Typically this means:

Data produced for the US market is often reusable, if it was generated on the final formula and packaging with a recognized method. Check dates, batch and packaging match what you will sell.

Person loading boxes into a delivery van

Step 5: Notify through the SCPN service

The Responsible Person must submit the product details through the Submit cosmetic product notifications service before the product is made available in Great Britain. The notification typically includes the product name and category, the Responsible Person’s details, the country of origin for imports, the formulation and, where relevant, nanomaterials. Nanomaterials not covered by the relevant annexes need a separate nanomaterial notification. Serious undesirable effects must be reported to OPSS without delay.

Step 6: Convert the label

A US label usually needs changes before it can be used in the UK. The UK guidance lists these items on the container and packaging:

  1. the Responsible Person’s name and address;
  2. the country of origin, if the product is imported;
  3. the weight or volume (not always required for very small contents, under 5 g or 5 ml);
  4. a use-until date;
  5. precautions for use;
  6. an identification number, such as a batch number;
  7. what the product does;
  8. the ingredients, which may appear on the packaging only, with “(nano)” after nanomaterials.

US-specific elements such as Drug Facts panels, or “Distributed by” lines that do not show a UK address, should be replaced or supplemented.

延伸阅读 化妆品责任人 (RP):谁需要、做什么

What about Northern Ireland and the EU?

The guidance for Great Britain does not cover Northern Ireland, where the Responsible Person must be established in Northern Ireland or the EU, and the EU system applies. A product sold in both GB and the EU therefore usually needs a UK Responsible Person plus an EU Responsible Person, a SCPN notification plus a CPNP notification, and a label with both addresses. A single well-prepared safety report can usually serve both markets. Read more in our guide to the UK and EU CPSR.

Common mistakes US brands make

  • Using a mail-forwarding address as the UK address.
  • Selling on UK marketplaces before the SCPN notification is complete.
  • Keeping the PIF only in the original language of the manufacturer.
  • Assuming an FDA-compliant ingredient or colorant is automatically allowed in the UK.
  • Making disease claims that turn a cosmetic into a medicine in the UK.

Frequently asked questions

Does a US brand need a UK Responsible Person?

Yes. A product made available in Great Britain needs a Responsible Person with a UK address, who can be an importer or a company or person you appoint.

Can I use my EU CPSR in the UK?

Often the technical content can be reused, but the report should be checked against the UK regulation and the assessor’s qualifications confirmed for the UK. Ask your assessor to confirm both.

Is there an approval process for cosmetics in the UK?

No. There is no product approval, but notification through the SCPN service is required before the product is made available.

Key takeaways

  • FDA compliance and MoCRA listing do not replace UK requirements: you need a UK Responsible Person, a PIF in English and an SCPN notification.
  • A signed safety report from a qualified assessor must exist before the first sale.
  • Stability, microbiology and challenge test data are mostly reusable if produced on the final product.
  • If you also sell in the EU or Northern Ireland, plan for the EU Responsible Person and CPNP as well.
来源 (5)
来源 发布方 链接
Making cosmetic products available to consumers in Great Britain GOV.UK gov.uk/guidance/making-cosmetic-products-available-to-consumers-in-great-britain
Cosmetic Products Enforcement Regulations 2013 and Regulation (EC) 1223/2009 (Northern Ireland) GOV.UK (OPSS) gov.uk/government/publications/cosmetic-products-enforcement-regulations-2013/regulation-20091223-and-the-cosmetic-products-enforcement-regulations-2013-northern-ireland
Regulation (EC) No 1223/2009 as retained in UK law (Annex I, safety report) legislation.gov.uk legislation.gov.uk/eur/2009/1223/annex/I/2022-10-15
Modernization of Cosmetics Regulation Act of 2022 (MoCRA) U.S. Food and Drug Administration fda.gov/cosmetics/cosmetics-laws-regulations/modernization-cosmetics-regulation-act-2022-mocra
ISO 22716:2007 Cosmetics: Good Manufacturing Practices ISO iso.org/standard/36437.html

延伸阅读

所有文章 →
首单立减 10%,套餐立减 20%!
套餐优惠人人可享。如需享受 10% 折扣,请创建免费账户并确认邮箱。
立即开始

编辑之前的CPSR 安全报告,还是新建一个?

已加入购物车

您的 CPSR 安全报告 以及您填写的所有内容现已在购物车中。请前往结账完成订单,或继续添加测试,您的答案会保留在此项目中。

前往结账
订购 CPSR 报告
草稿已恢复
1
公司
2
产品
3
包装
4
配方
5
检测
6
包装设计稿
7
核对

请填写产品表单。我们的安全评估人员将尽快确认您的订单。

I. 订购安全评估的个人 / 公司
II. 产品信息
III. 使用条件与包装
IV. 产品配方
#INCI 名称CAS 编号纳米产品中的 %
可能含有
合计0/ 100%
V. 成品的规格与测试

除微生物低风险产品外,所有化妆品均需进行挑战测试。微生物低风险产品包括:

  • 不含水或水活度低的产品
  • pH 低于 3 或高于 10 的产品
  • 酒精含量超过 20% 的产品
  • 含有会形成恶劣环境的原料的产品(强氧化剂、极性有机溶剂、氧化性染料、氯化羟铝及相关盐类、抛射气体等)
  • 在 65 °C 以上灌装的产品
  • 装入加压容器、泵式分配器或单剂量包装的产品
什么情况下无需挑战测试?

除微生物低风险产品外,所有化妆品均需进行挑战测试。微生物低风险产品包括:

  • 不含水或水活度低的产品
  • pH 低于 3 或高于 10 的产品
  • 酒精含量超过 20% 的产品
  • 含有会形成恶劣环境的原料的产品(强氧化剂、极性有机溶剂、氧化性染料、氯化羟铝及相关盐类、抛射气体等)
  • 在 65 °C 以上灌装的产品
  • 装入加压容器、泵式分配器或单剂量包装的产品
VI. 产品包装与设计稿选填 — 我们会将标签与最终 CPSR 核对,因此外包装和内包装容器的设计稿会很有帮助。您也可以稍后再发送给我们。
VII. 核对您的订单
价格—

编辑之前的安全数据表,还是新建一个?

已加入购物车

您的 安全数据表 以及您填写的所有内容现已在购物车中。请前往结账完成订单,或继续添加测试,您的答案会保留在此项目中。

前往结账
订购安全数据表(SDS)
草稿已恢复
1
客户
2
配方
3
语言
4
详情
5
核对

请填写下方表单。我们将为您快速准备符合 REACH 的 SDS。

I. 客户信息
客户
SDS 持有人
II. 产品配方信息
#INCI 名称CAS 编号产品中的 %
合计0/ 100%

成分表很长?从我们的电子表格开始吧。

下载模板,用 Excel、Numbers、LibreOffice 或 Google 表格填写后上传到此处,每个字段都会落到正确的位置。手动填写表单同样可行。

下载模板(.xlsx) 或 .csv
III. 法规区域与语言版本SDS 必须以产品投放的每个市场的官方语言提供。请选择您销售的每个市场 — 每选一项,我们出具一个语言版本。
已选 0 项
IV. 产品的补充信息此步骤的所有内容均为选填,但您提供得越多,我们完成 SDS 的速度就越快。
V. 核对您的订单
起价—
订单数据

您为此项目填写的所有内容。

服务流程

两种方式让产品做好上市准备—选择适合您的一种。

我知道自己需要什么

选择测试并结账

1 将测试加入购物车并结账
2 我们为您安排免费 DHL 取件取走样品
3 我们进行测试,您获得结果
订购检测 & CPSR

我不确定自己需要什么

添加产品信息并获取推荐

1 登录并添加产品信息,查看您的需求
2 订购所需测试—我们安排取件
3 测试完成后您即可获得结果
立即开始
仍不确定? 回答问卷