Coșul dumneavoastră

Expedierea / ridicarea este întotdeauna inclusă în fiecare comandă.
Coșul dumneavoastră este gol
Adăugați un test pentru a începe
Răsfoiți testele
Cosmetic Testing Lab

EU Restricted Preservatives: Reformulating a US Cosmetic

noiembrie 21, 2026  ·  7 min de citit

EU Restricted Preservatives: Reformulating a US Cosmetic

If your US formula uses a preservative that the EU restricts, you will have to change it before you ship. This guide to EU restricted preservatives shows which common US preservatives hit limits in Europe, how to read the rules, and how to reformulate without losing microbial protection. It is general information, not legal advice.

Cuprins
  1. The short answer
  2. Why a US-compliant formula can fail in the EU
  3. How to read Annex V
  4. Isothiazolinones: the biggest change for US formulas
  5. Parabens: allowed, but with tighter rules
  6. Formaldehyde releasers and other substances to check
  7. What to use instead
  8. Prove the new system works
  9. A practical reformulation checklist
  10. Frequently asked questions
  11. Key takeaways

The short answer

In the EU, only preservatives listed in Annex V of Regulation (EC) No 1223/2009 may be added to a cosmetic for preservation, and each comes with limits on concentration, product type or label wording. A US formula that uses methylisothiazolinone, a high paraben load or a formaldehyde releaser often needs reformulating, and every new preservative system must be proven with a challenge test before the safety assessor signs the CPSR. Several EU preservative limits have been tightened over the past decade, so use the current consolidated text and not an old supplier datasheet.

Why a US-compliant formula can fail in the EU

In the US, the FDA does not keep a positive list of preservatives for cosmetics. Brands choose a preservative, are responsible for the safety of the product, and prove that safety through the evidence they hold. The EU works the other way round: Annex V is a closed list. If a substance is used as a preservative and is not on it, it cannot be added for that purpose, and several well-known substances are prohibited outright in Annex II.

That means a formula that is fully legal at home can contain a substance that is limited, restricted to certain product types, or not allowed at all in Europe. Finding this early is far cheaper than discovering it when the safety assessor reviews the file.

Citiți și Conservanți cosmetici aprobați în UE: Anexa V explicată

How to read Annex V

Each entry lists the substance, its INCI name and a maximum concentration, usually calculated in a specific way (for example as the acid, not the salt). Other columns restrict the product type (for instance rinse-off only), set a limit for children under three, or require a warning on the label. Substances that are also on other lists, such as the fragrance allergen list, follow those rules in addition.

Three practical points save time:

  • Check the concentration basis. A limit expressed as the acid means you must convert salts and esters.
  • Check the product type. A preservative allowed in a shampoo may be banned in a leave-on cream.
  • Check sums and mixtures. Some entries cap the total of a group of related substances, not each one.
Six-card overview of how to replace a restricted preservative when moving a US cosmetic formula to the EU market.

Isothiazolinones: the biggest change for US formulas

Methylisothiazolinone (MIT) became a major contact allergen, and the EU acted. Regulation (EU) 2016/1198 prohibited MIT in leave-on products, and Regulation (EU) 2017/1224 lowered the rinse-off limit to 0.0015% (15 ppm). The mixture of methylchloroisothiazolinone and methylisothiazolinone is also limited to 0.0015% in rinse-off products and is not allowed in leave-on products. The two entries are mutually exclusive in the same product.

If your US lotion, wipe or leave-on hair product relies on MIT, it must be replaced entirely. Rinse-off products need a hard look at the actual dose, because 15 ppm is far below what many US formulas use. Note that scientific committees have kept reviewing these substances, so confirm the latest text before you finalise.

Parabens: allowed, but with tighter rules

Parabens are not banned in the EU, which surprises many US brands. They are, however, tightly restricted:

  • Methylparaben and ethylparaben: up to 0.4% (as acid) for a single ester and 0.8% for mixtures of esters.
  • Propylparaben and butylparaben: a combined maximum of 0.14% (as acid), and not in leave-on products designed for the nappy area of children under three years.
  • Isopropyl-, isobutyl-, phenyl-, benzyl- and pentylparaben are prohibited.

A US formula that stacks four parabens for broad-spectrum cover can exceed these sums even when each single value looks small. Add them up on the same basis before you decide.

Citiți și Conservanți cosmetici naturali care funcționează cu adevărat

Formaldehyde releasers and other substances to check

Formaldehyde and several releasers are tightly regulated. Where a finished product contains formaldehyde above 0.05%, the label must state “releases formaldehyde”. Some releasers have been removed from the allowed list over time. Methyldibromo glutaronitrile, once common, is no longer allowed. Others, such as DMDM hydantoin, remain on Annex V with a cap, so check the entry and its label requirement instead of assuming.

Other ingredients with typical limits include phenoxyethanol (1%), benzyl alcohol and salicylic acid (with age and product-type conditions). Many US formulas sit close to these limits, so verify each ingredient on the current list.

What to use instead

There is no single drop-in replacement. Most reformulations combine several measures:

  • Allowed preservatives at permitted levels, for example phenoxyethanol-based systems, organic acids and their salts such as benzoates and sorbates (pH-dependent), or other Annex V entries suited to your product type.
  • Multifunctional ingredients such as certain glycols and fatty-acid esters that support preservation. They are not a substitute on their own, and the claim “preservative-free” needs care.
  • Formula levers: lower water activity, adjusted pH, chelating agents, and fewer nutrient-rich botanicals.
  • Process and packaging: airless pumps and clean production lower the load the preservative has to handle.

The right option depends on your emulsion, pH, surfactants and packaging. A system that works at pH 5 may fail at pH 7.

Smiling scientist holding a flask of red liquid

Prove the new system works

Whenever you change the preservative system, you cannot rely on the old data. A challenge test challenges the product with five reference microorganisms over 28 days, and the standard we apply is ISO 11930:2019 or USP 51. The EU CPSR guidance expects this evidence for products where microbial growth is a risk, such as water-based formulas. After the challenge test, run a microbiological specifications test on the finished product to confirm its quality.

Also repeat stability and compatibility testing. A new preservative can change pH, colour, odour or viscosity, and it can interact with the packaging. A preservative that passes today but loses efficacy after months at warm storage is a hidden risk.

Citiți și Reglementarea nanomaterialelor în cosmetice: reguli și notificare

A practical reformulation checklist

  1. List every ingredient with its function and concentration.
  2. Check each preservative against the current Annex V and Annex II.
  3. Check product type, concentration basis, sums and label conditions.
  4. Choose a new system and make a small test batch.
  5. Run a challenge test, then stability and microbiological tests.
  6. Give the full data to your safety assessor for the CPSR.
  7. Update the label, including any required warning wording.

Frequently asked questions

Are parabens banned in the EU?

No. Several parabens are allowed within limits, and some are prohibited. The limits are lower than many US formulas assume, especially for propylparaben and butylparaben.

Can I keep my US preservative if the product is rinse-off only?

Sometimes. Some entries allow a higher use in rinse-off than in leave-on, but the limit still applies. Methylisothiazolinone, for example, is capped at 15 ppm even in rinse-off products.

Do I need a new challenge test after changing the preservative?

Yes. A different preservative system is a different product from a microbiological point of view, so the earlier results do not carry over.

Key takeaways

  • The EU allows only Annex V preservatives, with concentration, product-type and label conditions.
  • MIT in leave-on products is prohibited, and rinse-off use is capped at 15 ppm.
  • Parabens are allowed within tighter limits, with some banned outright.
  • Every new preservative system needs a challenge test, stability data and a signed CPSR.
Surse (6)
Sursă Editor Link
Regulation (EC) No 1223/2009 on cosmetic products European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2009/1223/oj
Commission Regulation (EU) 2016/1198 (methylisothiazolinone) European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2016/1198/oj
Commission Regulation (EU) 2017/1224 (methylisothiazolinone) European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2017/1224/oj
Commission Regulation (EU) No 1004/2014 (parabens) European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2014/1004/oj
Cosmetic Products Regulation, Annex V - Allowed Preservatives ECHA echa.europa.eu/lt/cosmetics-preservatives/-/legislationlist/details/EU-COSM_PROD-ANX_V_ALLOW_PRESERV-100.018.399-VSK-01048E
ISO 11930:2019 Evaluation of antimicrobial protection of a cosmetic product ISO iso.org/standard/75058.html

Citiți și

Toate articolele →
noiembrie 21, 2026

Allowed in the US, Banned in the EU: Ingredients to Check

Citiți mai mult →
noiembrie 21, 2026

Talc in Cosmetics: Asbestos Testing Rules Under MoCRA

Citiți mai mult →
noiembrie 21, 2026

Fragrance Allergen Labeling in the US: What MoCRA Will Require

Citiți mai mult →
noiembrie 21, 2026

FDA Cosmetic GMP Under MoCRA: What It Means for Batch Testing

Citiți mai mult →
noiembrie 21, 2026

MoCRA Small Business Exemption: Who Qualifies, What Applies

Citiți mai mult →
noiembrie 21, 2026

MoCRA Adverse Event Reporting: What Small Brands Must Do

Citiți mai mult →
noiembrie 21, 2026

Walmart Cosmetic Supplier Requirements and Target: Your File

Citiți mai mult →
noiembrie 21, 2026

SDS for Cosmetics in the USA: OSHA, Shippers and Retailers

Citiți mai mult →
noiembrie 21, 2026

State Cosmetics Laws: PFAS Bans in WA, MN, ME, NY and More

Citiți mai mult →
noiembrie 21, 2026

California Cosmetics Law: Prop 65, Toxic-Free Act, PFAS Ban

Citiți mai mult →
noiembrie 21, 2026

Selling US Cosmetics in the UK: SCPN, Responsible Person, Safety Report

Citiți mai mult →
noiembrie 21, 2026

Selling a US Sunscreen in the EU: From OTC Monograph to Cosmetic

Citiți mai mult →
noiembrie 21, 2026

Cosmetic or Drug? Sunscreens, Acne and Dandruff: US vs EU

Citiți mai mult →
noiembrie 21, 2026

FDA Color Additives vs EU CI Numbers: What Changes on Export

Citiți mai mult →
noiembrie 21, 2026

FDA vs EU Cosmetic Labels: Convert Your US Label for Europe

Citiți mai mult →
Economisiți 10% la prima comandă și 20% la pachete!
Reducere la pachete pentru toți. Pentru 10%, creați un cont gratuit și confirmați e-mailul.
Începeți

Raport de siguranță CPSR: editați un document anterior sau începeți unul nou?

Adăugat în coș

Raport de siguranță CPSR și tot ce ați completat se află acum în coș. Mergeți la finalizarea comenzii sau continuați să adăugați teste — răspunsurile rămân asociate cu acest articol.

Mergeți la finalizarea comenzii
Comandați raportul CPSR
Ciornă restaurată
1
Companie
2
Produs
3
Ambalaj
4
Formulă
5
Teste
6
Grafică
7
Verificare

Completați formularul produsului. Evaluatorii noștri de siguranță vă vor confirma comanda în scurt timp.

I. Persoana / compania care comandă evaluarea de siguranță
II. Informații despre produs
III. Condiții de utilizare și ambalaj
IV. Formula produsului
#Denumire INCINumăr CASNano% în produs
Poate conține
Total0/ 100%
V. Specificații și teste ale produsului finit

Testul de provocare este necesar pentru orice produs cosmetic, cu excepția celor cu risc microbiologic scăzut, care sunt:

  • Produse care nu conțin apă sau au activitate scăzută a apei
  • Produse cu pH sub 3 sau peste 10
  • Produse care conțin mai mult de 20% alcool
  • Produse care conțin materii prime ce creează un mediu ostil (oxidanți puternici, solvenți organici polari, coloranți oxidanți, clorhidrat de aluminiu și săruri înrudite, gaze propulsoare etc.)
  • Produse umplute în recipiente la peste 65 °C
  • Produse ambalate în recipiente presurizate, dozatoare cu pompă sau unități monodoză
Când nu este necesar un test de provocare?

Testul de provocare este necesar pentru orice produs cosmetic, cu excepția celor cu risc microbiologic scăzut, care sunt:

  • Produse care nu conțin apă sau au activitate scăzută a apei
  • Produse cu pH sub 3 sau peste 10
  • Produse care conțin mai mult de 20% alcool
  • Produse care conțin materii prime ce creează un mediu ostil (oxidanți puternici, solvenți organici polari, coloranți oxidanți, clorhidrat de aluminiu și săruri înrudite, gaze propulsoare etc.)
  • Produse umplute în recipiente la peste 65 °C
  • Produse ambalate în recipiente presurizate, dozatoare cu pompă sau unități monodoză
VI. Ambalajul și grafica produsuluiOpțional — verificăm eticheta față de CPSR finalizat, deci grafica pentru ambalajul exterior și recipientul primar ne ajută. O puteți trimite și mai târziu.
VII. Verificați comanda
Preț—

Fișă cu date de securitate: editați un document anterior sau începeți unul nou?

Adăugat în coș

Fișă cu date de securitate și tot ce ați completat se află acum în coș. Mergeți la finalizarea comenzii sau continuați să adăugați teste — răspunsurile rămân asociate cu acest articol.

Mergeți la finalizarea comenzii
Comandați Fișa cu date de securitate
Ciornă restaurată
1
Client
2
Formulă
3
Limbi
4
Detalii
5
Verificare

Completați formularul de mai jos. Vă vom pregăti SDS conform REACH, cu un timp de execuție scurt.

I. Informații despre client
Clientul
Deținătorul SDS
II. Informații despre formula produsului
#Denumire INCINumăr CAS% în produs
Total0/ 100%

Aveți o listă lungă de ingrediente? Porniți de la foaia noastră de calcul.

Descărcați șablonul, completați-l în Excel, Numbers, LibreOffice sau Google Sheets, apoi încărcați-l aici — fiecare câmp ajunge la locul potrivit. Completarea manuală a formularului funcționează la fel de bine.

Descărcați șablonul (.xlsx) sau .csv
III. Zona de reglementare și versiunile lingvisticeUn SDS trebuie furnizat în limba oficială a fiecărei piețe pe care este introdus produsul. Alegeți fiecare piață pe care distribuiți — emitem câte o versiune lingvistică pentru fiecare selecție.
0 selectate
IV. Informații suplimentare despre produsTot ce se află în acest pas este opțional, dar cu cât ne oferiți mai multe, cu atât mai repede putem finaliza SDS.
V. Verificați comanda
De la—
Datele comenzii

Tot ce ați completat pentru acest articol.

Cum funcționează

Două modalități de a fi pregătit pentru piață — alegeți-o pe cea potrivită.

Știu de ce am nevoie

Alegeți testele & finalizați comanda

1 Adăugați teste în coș & finalizați comanda
2 Organizăm ridicarea gratuită a probelor dumneavoastră cu DHL
3 Le testăm, iar dumneavoastră primiți rezultatele
Comandați teste & CPSR

Nu sunt sigur de ce am nevoie

Adăugați informații despre produs & primiți recomandări

1 Autentificați-vă & adăugați informații despre produs pentru a vedea de ce aveți nevoie
2 Comandați testele necesare — organizăm noi ridicarea
3 Primiți rezultatele după finalizarea testelor
Începeți
Tot nu sunteți sigur? Răspundeți la chestionar