Il Suo carrello

Spedizione / ritiro sono sempre inclusi in ogni ordine.
Il Suo carrello è vuoto
Aggiunga un test per iniziare
Sfoglia i test
Cosmetic Testing Lab

EU Restricted Preservatives: Reformulating a US Cosmetic

Novembre 21, 2026  ·  7 min di lettura

EU Restricted Preservatives: Reformulating a US Cosmetic

If your US formula uses a preservative that the EU restricts, you will have to change it before you ship. This guide to EU restricted preservatives shows which common US preservatives hit limits in Europe, how to read the rules, and how to reformulate without losing microbial protection. It is general information, not legal advice.

Indice
  1. The short answer
  2. Why a US-compliant formula can fail in the EU
  3. How to read Annex V
  4. Isothiazolinones: the biggest change for US formulas
  5. Parabens: allowed, but with tighter rules
  6. Formaldehyde releasers and other substances to check
  7. What to use instead
  8. Prove the new system works
  9. A practical reformulation checklist
  10. Frequently asked questions
  11. Key takeaways

The short answer

In the EU, only preservatives listed in Annex V of Regulation (EC) No 1223/2009 may be added to a cosmetic for preservation, and each comes with limits on concentration, product type or label wording. A US formula that uses methylisothiazolinone, a high paraben load or a formaldehyde releaser often needs reformulating, and every new preservative system must be proven with a challenge test before the safety assessor signs the CPSR. Several EU preservative limits have been tightened over the past decade, so use the current consolidated text and not an old supplier datasheet.

Why a US-compliant formula can fail in the EU

In the US, the FDA does not keep a positive list of preservatives for cosmetics. Brands choose a preservative, are responsible for the safety of the product, and prove that safety through the evidence they hold. The EU works the other way round: Annex V is a closed list. If a substance is used as a preservative and is not on it, it cannot be added for that purpose, and several well-known substances are prohibited outright in Annex II.

That means a formula that is fully legal at home can contain a substance that is limited, restricted to certain product types, or not allowed at all in Europe. Finding this early is far cheaper than discovering it when the safety assessor reviews the file.

Leggi anche Conservanti ammessi UE per i cosmetici: Allegato V spiegato

How to read Annex V

Each entry lists the substance, its INCI name and a maximum concentration, usually calculated in a specific way (for example as the acid, not the salt). Other columns restrict the product type (for instance rinse-off only), set a limit for children under three, or require a warning on the label. Substances that are also on other lists, such as the fragrance allergen list, follow those rules in addition.

Three practical points save time:

  • Check the concentration basis. A limit expressed as the acid means you must convert salts and esters.
  • Check the product type. A preservative allowed in a shampoo may be banned in a leave-on cream.
  • Check sums and mixtures. Some entries cap the total of a group of related substances, not each one.
Six-card overview of how to replace a restricted preservative when moving a US cosmetic formula to the EU market.

Isothiazolinones: the biggest change for US formulas

Methylisothiazolinone (MIT) became a major contact allergen, and the EU acted. Regulation (EU) 2016/1198 prohibited MIT in leave-on products, and Regulation (EU) 2017/1224 lowered the rinse-off limit to 0.0015% (15 ppm). The mixture of methylchloroisothiazolinone and methylisothiazolinone is also limited to 0.0015% in rinse-off products and is not allowed in leave-on products. The two entries are mutually exclusive in the same product.

If your US lotion, wipe or leave-on hair product relies on MIT, it must be replaced entirely. Rinse-off products need a hard look at the actual dose, because 15 ppm is far below what many US formulas use. Note that scientific committees have kept reviewing these substances, so confirm the latest text before you finalise.

Parabens: allowed, but with tighter rules

Parabens are not banned in the EU, which surprises many US brands. They are, however, tightly restricted:

  • Methylparaben and ethylparaben: up to 0.4% (as acid) for a single ester and 0.8% for mixtures of esters.
  • Propylparaben and butylparaben: a combined maximum of 0.14% (as acid), and not in leave-on products designed for the nappy area of children under three years.
  • Isopropyl-, isobutyl-, phenyl-, benzyl- and pentylparaben are prohibited.

A US formula that stacks four parabens for broad-spectrum cover can exceed these sums even when each single value looks small. Add them up on the same basis before you decide.

Leggi anche Conservanti naturali per cosmetici che funzionano davvero

Formaldehyde releasers and other substances to check

Formaldehyde and several releasers are tightly regulated. Where a finished product contains formaldehyde above 0.05%, the label must state “releases formaldehyde”. Some releasers have been removed from the allowed list over time. Methyldibromo glutaronitrile, once common, is no longer allowed. Others, such as DMDM hydantoin, remain on Annex V with a cap, so check the entry and its label requirement instead of assuming.

Other ingredients with typical limits include phenoxyethanol (1%), benzyl alcohol and salicylic acid (with age and product-type conditions). Many US formulas sit close to these limits, so verify each ingredient on the current list.

What to use instead

There is no single drop-in replacement. Most reformulations combine several measures:

  • Allowed preservatives at permitted levels, for example phenoxyethanol-based systems, organic acids and their salts such as benzoates and sorbates (pH-dependent), or other Annex V entries suited to your product type.
  • Multifunctional ingredients such as certain glycols and fatty-acid esters that support preservation. They are not a substitute on their own, and the claim “preservative-free” needs care.
  • Formula levers: lower water activity, adjusted pH, chelating agents, and fewer nutrient-rich botanicals.
  • Process and packaging: airless pumps and clean production lower the load the preservative has to handle.

The right option depends on your emulsion, pH, surfactants and packaging. A system that works at pH 5 may fail at pH 7.

Smiling scientist holding a flask of red liquid

Prove the new system works

Whenever you change the preservative system, you cannot rely on the old data. A challenge test challenges the product with five reference microorganisms over 28 days, and the standard we apply is ISO 11930:2019 or USP 51. The EU CPSR guidance expects this evidence for products where microbial growth is a risk, such as water-based formulas. After the challenge test, run a microbiological specifications test on the finished product to confirm its quality.

Also repeat stability and compatibility testing. A new preservative can change pH, colour, odour or viscosity, and it can interact with the packaging. A preservative that passes today but loses efficacy after months at warm storage is a hidden risk.

Leggi anche Nanomateriali nei cosmetici: regole UE e notifica

A practical reformulation checklist

  1. List every ingredient with its function and concentration.
  2. Check each preservative against the current Annex V and Annex II.
  3. Check product type, concentration basis, sums and label conditions.
  4. Choose a new system and make a small test batch.
  5. Run a challenge test, then stability and microbiological tests.
  6. Give the full data to your safety assessor for the CPSR.
  7. Update the label, including any required warning wording.

Frequently asked questions

Are parabens banned in the EU?

No. Several parabens are allowed within limits, and some are prohibited. The limits are lower than many US formulas assume, especially for propylparaben and butylparaben.

Can I keep my US preservative if the product is rinse-off only?

Sometimes. Some entries allow a higher use in rinse-off than in leave-on, but the limit still applies. Methylisothiazolinone, for example, is capped at 15 ppm even in rinse-off products.

Do I need a new challenge test after changing the preservative?

Yes. A different preservative system is a different product from a microbiological point of view, so the earlier results do not carry over.

Key takeaways

  • The EU allows only Annex V preservatives, with concentration, product-type and label conditions.
  • MIT in leave-on products is prohibited, and rinse-off use is capped at 15 ppm.
  • Parabens are allowed within tighter limits, with some banned outright.
  • Every new preservative system needs a challenge test, stability data and a signed CPSR.
Fonti (6)
Fonte Editore Link
Regulation (EC) No 1223/2009 on cosmetic products European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2009/1223/oj
Commission Regulation (EU) 2016/1198 (methylisothiazolinone) European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2016/1198/oj
Commission Regulation (EU) 2017/1224 (methylisothiazolinone) European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2017/1224/oj
Commission Regulation (EU) No 1004/2014 (parabens) European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2014/1004/oj
Cosmetic Products Regulation, Annex V - Allowed Preservatives ECHA echa.europa.eu/lt/cosmetics-preservatives/-/legislationlist/details/EU-COSM_PROD-ANX_V_ALLOW_PRESERV-100.018.399-VSK-01048E
ISO 11930:2019 Evaluation of antimicrobial protection of a cosmetic product ISO iso.org/standard/75058.html
Risparmi il 10% sul primo ordine e il 20% sui bundle!
Sconto sui pacchetti per tutti. Per il 10%, crea un account gratuito e conferma la tua email.
Inizia

Rapporto di sicurezza CPSR: modificare un documento precedente o iniziarne uno nuovo?

Aggiunto al carrello

Il Suo Rapporto di sicurezza CPSR e tutto ciò che ha compilato sono ora nel carrello. Vada al checkout per completare l'ordine, oppure continui ad aggiungere test: le Sue risposte restano associate a questo articolo.

Vai al checkout
Ordina il report CPSR
Bozza ripristinata
1
Azienda
2
Prodotto
3
Imballaggio
4
Formula
5
Test
6
Grafica
7
Riepilogo

Compili il modulo del prodotto. I nostri valutatori della sicurezza confermeranno a breve il Suo ordine.

I. Persona / azienda che ordina la valutazione della sicurezza
II. Informazioni sul prodotto
III. Condizioni d'uso e imballaggio
IV. Formula del prodotto
#Denominazione INCINumero CASNano% nel prodotto
Può contenere
Totale0/ 100%
V. Specifiche e test del prodotto finito

Il challenge test è richiesto per ogni prodotto cosmetico, tranne quelli a basso rischio microbiologico, che sono:

  • Prodotti che non contengono acqua o hanno una bassa attività dell'acqua
  • Prodotti con pH inferiore a 3 o superiore a 10
  • Prodotti con più del 20% di alcol
  • Prodotti contenenti materie prime che creano un ambiente ostile (forti agenti ossidanti, solventi organici polari, coloranti ossidanti, alluminio cloridrato e sali correlati, gas propellenti e così via)
  • Prodotti riempiti in contenitori a più di 65 °C
  • Prodotti confezionati in contenitori pressurizzati, erogatori a pompa o unità monodose
Quando il challenge test non è richiesto?

Il challenge test è richiesto per ogni prodotto cosmetico, tranne quelli a basso rischio microbiologico, che sono:

  • Prodotti che non contengono acqua o hanno una bassa attività dell'acqua
  • Prodotti con pH inferiore a 3 o superiore a 10
  • Prodotti con più del 20% di alcol
  • Prodotti contenenti materie prime che creano un ambiente ostile (forti agenti ossidanti, solventi organici polari, coloranti ossidanti, alluminio cloridrato e sali correlati, gas propellenti e così via)
  • Prodotti riempiti in contenitori a più di 65 °C
  • Prodotti confezionati in contenitori pressurizzati, erogatori a pompa o unità monodose
VI. Imballaggio e grafica del prodottoFacoltativo — controlliamo l'etichetta rispetto al CPSR finale, quindi la grafica dell'imballaggio esterno e del contenitore primario è utile. Può anche inviarcela in un secondo momento.
VII. Riepilogo del Suo ordine
Prezzo—

Scheda di dati di sicurezza: modificare un documento precedente o iniziarne uno nuovo?

Aggiunto al carrello

Il Suo Scheda di dati di sicurezza e tutto ciò che ha compilato sono ora nel carrello. Vada al checkout per completare l'ordine, oppure continui ad aggiungere test: le Sue risposte restano associate a questo articolo.

Vai al checkout
Ordina la scheda di dati di sicurezza
Bozza ripristinata
1
Cliente
2
Formula
3
Lingue
4
Dettagli
5
Riepilogo

Compili il modulo qui sotto. Prepareremo la Sua SDS conforme a REACH con tempi di consegna rapidi.

I. Informazioni sul cliente
Il cliente
Titolare della SDS
II. Informazioni sulla formula del prodotto
#Denominazione INCINumero CAS% nel prodotto
Totale0/ 100%

Ha un lungo elenco di ingredienti? Parta dal nostro foglio di calcolo.

Scarichi il modello, lo compili in Excel, Numbers, LibreOffice o Google Sheets, poi lo carichi qui: ogni campo finisce al posto giusto. Compilare il modulo a mano funziona altrettanto bene.

Scarica il modello (.xlsx) o .csv
III. Area normativa e versioni linguisticheUna SDS deve essere fornita nella lingua ufficiale di ogni mercato in cui il prodotto è immesso. Scelga ogni mercato in cui distribuisce — emettiamo una versione linguistica per ogni selezione.
0 selezionati
IV. Informazioni aggiuntive sul prodottoTutto in questo passaggio è facoltativo, ma più informazioni ci fornisce, più rapidamente potremo finalizzare la SDS.
V. Riepilogo del Suo ordine
A partire da—
Dati dell'ordine

Tutto ciò che ha compilato per questo articolo.

Come funziona

Due modi per essere pronti per il mercato — scelga quello che fa per Lei.

So cosa mi serve

Scelga i test & vada al checkout

1 Aggiunga i test al carrello & vada al checkout
2 Organizziamo noi il ritiro gratuito dei Suoi campioni con DHL
3 Li testiamo e Lei riceve i risultati
Ordina test e CPSR

Non so cosa mi serve

Aggiunga le informazioni sul prodotto & riceva consigli

1 Acceda & aggiunga le informazioni sul prodotto per vedere cosa Le serve
2 Ordini i test necessari — organizziamo noi il ritiro
3 Riceve i risultati al termine dei test
Inizia
Ancora indeciso? Risponda al questionario