您的购物车

每个订单均已包含运输/取件费用。
您的购物车是空的
添加检测即可开始
浏览测试
Cosmetic Testing Lab

Allowed in the US, Banned in the EU: Ingredients to Check

21 11 月, 2026  ·  阅读约 7 分钟

Allowed in the US, Banned in the EU: Ingredients to Check

Many brands assume that a formula sold legally in the US can be shipped to Europe unchanged. It cannot always be. Several ingredients banned in the EU are still allowed in the US, and the EU also caps or conditions many more that US law leaves to the brand’s own judgement. This guide shows why the lists differ, gives verified examples, and sets out a practical check you can run before you export.

目录
  1. The short answer
  2. Why do the two systems differ?
  3. Example 1: Lilial (butylphenyl methylpropional)
  4. Example 2: HICC (Lyral)
  5. Example 3: Methylisothiazolinone in leave-on products
  6. Example 4: Parabens
  7. Other groups that need a second look
  8. A six-step check before you export
  9. What if an ingredient fails?
  10. Common mistakes
  11. Frequently asked questions
  12. Key takeaways

The short answer

US federal law prohibits or restricts only a short list of cosmetic ingredients by name, while the EU keeps long annexes of banned and restricted substances in Regulation (EC) No 1223/2009. Ingredients such as Lilial, HICC (Lyral) and methylisothiazolinone in leave-on products can be legal in the US yet cannot be placed on the EU market. Before exporting, compare every ingredient and its concentration with the EU annexes, and have the result reviewed in the safety assessment (CPSR).

Why do the two systems differ?

The US framework puts the responsibility on the company: a cosmetic must be safe, properly labeled and not adulterated, and the FDA can act when a problem appears. Beyond a few named substances and the colour additive rules, there is no general positive or negative ingredient list. The FDA’s own page on prohibited and restricted ingredients names only a handful by regulation: bithionol, chlorofluorocarbon propellants, chloroform, halogenated salicylanilides, hexachlorophene, mercury compounds, methylene chloride, certain cattle materials, vinyl chloride and zirconium-containing complexes in aerosols, plus the rules for sunscreen ingredients and colour additives. The EU works differently. Its cosmetics Regulation lists prohibited substances in Annex II (well over a thousand entries), restricted ones in Annex III, and approved colourants, preservatives and UV filters in Annexes IV, V and VI. Article 15 also bans substances classified as carcinogenic, mutagenic or toxic for reproduction (CMR 1A or 1B) unless specific conditions are met.

The result: the EU list is updated regularly, so a formula that was acceptable two years ago may need review today.

延伸阅读 化妆品中的 CMR 物质详解:哪些被禁用

Example 1: Lilial (butylphenyl methylpropional)

Lilial is a fragrance ingredient with a soft floral note. In the EU it was prohibited by Commission Regulation (EU) 2021/1902, with the ban applying from 1 March 2022, after it was classified as toxic for reproduction. It is covered by the CMR rules and also affects products already on the shelf, not just new ones. The FDA’s allergen page lists Lilial among older fragrance allergens and notes that it is no longer in the EU list because the EU no longer permits it in cosmetics. Nothing in the US cosmetic rules by name stops its use. If your fragrance supplier uses it, your product may need a new fragrance before export.

Example 2: HICC (Lyral)

HICC, also called Lyral, is another fragrance ingredient that was removed from the EU market because of its link to contact allergy. The FDA allergen page notes it is no longer in the EU list because the EU no longer permits it. As with Lilial, this is a case where an older fragrance formula can contain a substance that is fine for US sale but not for the EU. Ask your fragrance house for the full composition, not only an IFRA certificate.

Table comparing how the US and the EU treat Lilial, HICC, methylisothiazolinone and parabens in cosmetics.

Example 3: Methylisothiazolinone in leave-on products

Methylisothiazolinone (MIT) is a preservative. After a rise in allergic reactions, the EU banned it in leave-on cosmetics (Commission Regulation (EU) 2016/1198, applying from early 2017) and later reduced the permitted level in rinse-off products to a very low figure. In the US no federal rule names MIT, so it can still appear in leave-on products. For an exporter, this matters for lotions, creams and wipes. Check the current Annex V entry and replace the preservative if the product is leave-on. A replacement system must be proven, which means a new challenge test.

延伸阅读 欧盟禁用化妆品成分:附件 II 和 III 指南

Example 4: Parabens

The EU did not ban all parabens. It prohibited five of them (isopropylparaben, isobutylparaben, phenylparaben, benzylparaben and pentylparaben) and limited propylparaben and butylparaben to a combined maximum of 0.14%, with extra conditions for leave-on products intended for the nappy area of children under three. Methylparaben and ethylparaben remain permitted within their annex limits. Check the current Annex II and V texts, because details have been amended. In the US there is no federal ban on these parabens, so a formula can contain a level or type that an EU assessor will not accept.

Other groups that need a second look

Banned substances are only part of the picture. Allowed ingredients also face conditions in the EU:

  • Colourants (Annex IV): only listed colourants and uses are allowed, and several US colour additives have no EU equivalent.
  • UV filters (Annex VI): the approved list and maximum concentrations differ from US sunscreen rules.
  • Preservatives (Annex V): a positive list with maximum levels and conditions.
  • Fragrance allergens: Regulation (EU) 2023/1545 requires named allergens on the label above set thresholds.
  • Nanomaterials: they need notification and are checked individually.
  • Microplastics: an EU restriction on intentionally added synthetic polymer microparticles is being phased in, with different dates by product type.

The lists are not symmetrical: a few ingredients are accepted in the EU but not in the US, so the check works in both directions when you import.

A six-step check before you export

  1. Export the full formula with INCI names, CAS numbers and percentages, including the fragrance and any premixes.
  2. Look up each ingredient in the EU cosmetic ingredient database (CosIng) and the Annexes II to VI.
  3. Check concentrations and conditions, such as product type, body area, age group and combined limits across related ingredients.
  4. Screen for CMR classification and for recent amendments, since the annexes change.
  5. Review the fragrance with your supplier, including allergens above the labeling thresholds.
  6. Record the outcome in your product file. The safety assessor will reach the same conclusions from the data, so it saves time to arrive prepared. Our guide on what a CPSR is shows what the assessor evaluates.
Two scientists in lab coats preparing an experiment

延伸阅读 化妆品纳米材料法规:规则与通报

What if an ingredient fails?

You usually have three options. First, replace the ingredient with an EU-compliant alternative that performs similarly. Second, adjust the level to the permitted maximum if the substance is restricted rather than banned. Third, make an EU-specific version of the product and keep the original for the US. In all cases, reformulation changes stability and preservation. Re-run the stability test for the new formula and the challenge test for water-containing products before the assessor signs off. Do not assume that existing US data automatically carries over.

Common mistakes

  • Checking only the main actives and forgetting fragrance, preservatives and colour premixes.
  • Relying on “FDA compliant” as proof the formula is EU-ready.
  • Using an old ingredient list from a supplier without checking recent annex changes.
  • Replacing a preservative without repeating preservation testing.
  • Assuming that a transition period lets you ship old US stock to the EU.

Frequently asked questions

Is a US cosmetic with Lilial illegal in the EU?

Yes, a cosmetic containing Lilial can no longer be placed on the EU market since the ban applied from 1 March 2022. The same product can still be marketed in the US, because no federal rule names the substance.

Where can I check whether an ingredient is allowed?

Start with the annexes of Regulation (EC) No 1223/2009 on EUR-Lex and the CosIng database, then confirm the current wording, because annexes are amended often. Your safety assessor will do the same check formally.

Does MoCRA bring the US closer to the EU list?

MoCRA adds registration, listing, safety substantiation and adverse event reporting, but it does not copy the EU annexes. Ingredient bans remain mostly different between the two systems.

Key takeaways

  • Gap: the US names a few banned ingredients; the EU keeps long annexes.
  • Examples: Lilial, HICC, MIT in leave-on products and some parabens are treated differently.
  • Check: screen every ingredient, including the fragrance, against Annexes II to VI before export.
  • Reformulate: a replacement needs new stability and, for water-based products, new challenge test data.
来源 (6)
来源 发布方 链接
Prohibited & Restricted Ingredients in Cosmetics U.S. Food and Drug Administration fda.gov/cosmetics/cosmetics-laws-regulations/prohibited-restricted-ingredients-cosmetics
Allergens in Cosmetics U.S. Food and Drug Administration fda.gov/cosmetics/cosmetic-ingredients/allergens-cosmetics
Regulation (EC) No 1223/2009 on cosmetic products (Annexes II to VI) European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2009/1223/oj
Bans on substances under EU cosmetics law (Lilial, Regulation (EU) 2021/1902) CMS Legal cms.law/en/deu/legal-updates/Bans-on-substances-under-EU-cosmetics-law
Fragrance allergens: Commission Regulation (EU) 2023/1545 European Union (EUR-Lex) eur-lex.europa.eu/eli/reg/2023/1545/oj
Microplastics restriction: Commission Regulation (EU) 2023/2055 European Commission single-market-economy.ec.europa.eu/sectors/chemicals/reach/restrictions/commission-regulation-eu-20232055-restriction-microplastics-intentionally-added-products_en

延伸阅读

所有文章 →
首单立减 10%,套餐立减 20%!
套餐优惠人人可享。如需享受 10% 折扣,请创建免费账户并确认邮箱。
立即开始

编辑之前的CPSR 安全报告,还是新建一个?

已加入购物车

您的 CPSR 安全报告 以及您填写的所有内容现已在购物车中。请前往结账完成订单,或继续添加测试,您的答案会保留在此项目中。

前往结账
订购 CPSR 报告
草稿已恢复
1
公司
2
产品
3
包装
4
配方
5
检测
6
包装设计稿
7
核对

请填写产品表单。我们的安全评估人员将尽快确认您的订单。

I. 订购安全评估的个人 / 公司
II. 产品信息
III. 使用条件与包装
IV. 产品配方
#INCI 名称CAS 编号纳米产品中的 %
可能含有
合计0/ 100%
V. 成品的规格与测试

除微生物低风险产品外,所有化妆品均需进行挑战测试。微生物低风险产品包括:

  • 不含水或水活度低的产品
  • pH 低于 3 或高于 10 的产品
  • 酒精含量超过 20% 的产品
  • 含有会形成恶劣环境的原料的产品(强氧化剂、极性有机溶剂、氧化性染料、氯化羟铝及相关盐类、抛射气体等)
  • 在 65 °C 以上灌装的产品
  • 装入加压容器、泵式分配器或单剂量包装的产品
什么情况下无需挑战测试?

除微生物低风险产品外,所有化妆品均需进行挑战测试。微生物低风险产品包括:

  • 不含水或水活度低的产品
  • pH 低于 3 或高于 10 的产品
  • 酒精含量超过 20% 的产品
  • 含有会形成恶劣环境的原料的产品(强氧化剂、极性有机溶剂、氧化性染料、氯化羟铝及相关盐类、抛射气体等)
  • 在 65 °C 以上灌装的产品
  • 装入加压容器、泵式分配器或单剂量包装的产品
VI. 产品包装与设计稿选填 — 我们会将标签与最终 CPSR 核对,因此外包装和内包装容器的设计稿会很有帮助。您也可以稍后再发送给我们。
VII. 核对您的订单
价格—

编辑之前的安全数据表,还是新建一个?

已加入购物车

您的 安全数据表 以及您填写的所有内容现已在购物车中。请前往结账完成订单,或继续添加测试,您的答案会保留在此项目中。

前往结账
订购安全数据表(SDS)
草稿已恢复
1
客户
2
配方
3
语言
4
详情
5
核对

请填写下方表单。我们将为您快速准备符合 REACH 的 SDS。

I. 客户信息
客户
SDS 持有人
II. 产品配方信息
#INCI 名称CAS 编号产品中的 %
合计0/ 100%

成分表很长?从我们的电子表格开始吧。

下载模板,用 Excel、Numbers、LibreOffice 或 Google 表格填写后上传到此处,每个字段都会落到正确的位置。手动填写表单同样可行。

下载模板(.xlsx) 或 .csv
III. 法规区域与语言版本SDS 必须以产品投放的每个市场的官方语言提供。请选择您销售的每个市场 — 每选一项,我们出具一个语言版本。
已选 0 项
IV. 产品的补充信息此步骤的所有内容均为选填,但您提供得越多,我们完成 SDS 的速度就越快。
V. 核对您的订单
起价—
订单数据

您为此项目填写的所有内容。

服务流程

两种方式让产品做好上市准备—选择适合您的一种。

我知道自己需要什么

选择测试并结账

1 将测试加入购物车并结账
2 我们为您安排免费 DHL 取件取走样品
3 我们进行测试,您获得结果
订购检测 & CPSR

我不确定自己需要什么

添加产品信息并获取推荐

1 登录并添加产品信息,查看您的需求
2 订购所需测试—我们安排取件
3 测试完成后您即可获得结果
立即开始
仍不确定? 回答问卷